Hyperikon Plasma Cutter, 3 in 1 TIG Welder, IGBT Inverter, 120V 240V Dual Voltage

bestarc Plasma Cutter, Pilot Arc BTC500DP 2nd Generation 50Amps Dual Voltage 110/220V Plasma Cutting Machine (BTC500DP 110/220)

$183.98 @ Amazon.com (Save 23%)

[Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.

[Dual-Voltage 110/220V]: Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.

[Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel，you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.

[Post Time Function]: BTC500DP with post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.

[Cutting Thickness]: BTC500DP is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.

bestarc Plasma Cutter, Pilot Arc BTC500DP 2nd Generation 50Amps Dual Voltage 110/220V Plasma Cutting Machine (BTC500DP 110/220)

YESWELDER Plasma Cutting Machine 65Amp Non-High Frequency Non-Touch Arc Digital Screen Display DC Inverter 110/220V Dual Voltage Blowback Plasma Cutting Machine CUT-65DS

$319.99 @ Amazon.com (Save 29%)

[NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.

[Digital Screen Display]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.

[Powerful Cleaning Cutting] CUT-65DS adopts the international leading MCU intelligent digital control technology, all the main components are realized by software. Ideal Clean Cut: 5/16"@110V, 5/8"@220V Maximum Cut: 1/2"@110V, 63/64"@220V.

[PT/2T/4T Function]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.

[AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.

[NON-TOUCH PILOT ARC] The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.

YESWELDER Plasma Cutting Machine 65Amp Non-High Frequency Non-Touch Arc Digital Screen Display DC Inverter 110/220V Dual Voltage Blowback Plasma Cutting Machine CUT-65DS

YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Screen Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Cutting Machine CUT-55DS Pro

$179.99 @ Amazon.com (Save 31%)

[NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.

[DIGITAL DISPLAY]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.

[CLEAN CUT] CUT-55DS PRO adopts the international leading MCU intelligent digital control technology, all the main components are realized by software.CLEAN CUT: 1/3''@110V 1/2''@220V // MAX CUT: 1/2''@110V 4/5''@220V.

[PT/2T/4T FUNCTION]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.

[AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.

[NON-TOUCH PILOT ARC] The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.

YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Screen Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Cutting Machine CUT-55DS Pro

DURATECH Plasma Cutter, 40Amp Non-Touch Pilot Arc Plasma Cutting Machine with 120V/240V Dual Voltage IGBT Inverter, Digital Display and 50A to 15A Plug Adapter, Plasma Cutting Equipment 1/2" Clean Cut

$229.99 @ Amazon.com

【NON-TOUCH PLASMA CUTTER】This plasma cutter can effectively cut rough, painted, rusted metal with less slag. Pilot arc technology allows you to cut without touching the tip to the metal for better cutting quality and a longer consumable life

【POWERFUL CLEAN CUT】Automatic dual voltage 120V and 240V for the wide use of light-duty work and heavy-duty construction site work. 1/2" clean cut thickness and 11/16" maximum severance cut thickness under 240V

【LIGHTWEIGHT AND PORTABLE】This compact plasma cutter is 14-3/8" L * 8-5/8" W * 6" H and weighs 14.4 lbs, making it easy to use in different environments. Lightweight for both men and women. Beautiful design, ideal gifts!

【WIDE CUTTING ABILITY】This 40 amp professional plasma cutter is suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, copper, titanium, and other metal materials. It is very friendly to both DIY, beginner cutter, and professional workers

【ADDED SAFETY】This non-touch pilot arc plasma cutter is certificated by CSA and the power cord is UL listed, automatic compensation for voltage fluctuation, over-current protection, overload protection, and temperature control. Please try with confidence. Any problems, please feel free to get in touch with us

DURATECH Plasma Cutter, 40Amp Non-Touch Pilot Arc Plasma Cutting Machine with 120V/240V Dual Voltage IGBT Inverter, Digital Display and 50A to 15A Plug Adapter, Plasma Cutting Equipment 1/2" Clean Cut

FLARING FC650DL Plasma Cutter, 65 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V with Consumable Set Digital Display

$229.99 @ Amazon.com

【65A NON-TOUCH PILOT ARC PLASMA CUTTER】Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.

【POWERFUL CUTTING PERFORMANCE】Automatic dual-voltage 120/240V. With advanced IGBT inverter technology, 10-60A DC output, 5/8” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.

【VOLTAGE TRANSFER】 The power cord plug installed on the machine is a 110V US standard plug. A conversion cord is included to easily convert 110V to 220V or 120V to 240V for use in your home, shop, or factory. 30A circuit breakers are recommended for 220V and 60A circuit breakers are recommended for 110V.

【PACKAGE INCLUDES】 FC650DL plasma cutter machine, upgrade plasma cutting torch AG60, ground clamp, air filter regulator, air hose, consumables, instruction manual etc.

【WARRANTY TRUSTED FROMR FLARING】FLARING offer a 30 day money-back guarantee and 1-year new replacement warranty covered by our US based lifetime technical support. To avail the warranty, please contact online to activate the warranty when you receive the goods.

【PORTABLE AND EASY TO USE】This plasma cutter machine only weighs 9 pounds, easy to carry. The pre-installed quick air coupling, only takes 30 seconds and you can start cutting. Significantly save your preparation time.

FLARING FC650DL Plasma Cutter, 65 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V with Consumable Set Digital Display

CUT50A Inverter Non touch HF Plasma Cutter 110 Voltage 45Amp 1/4 inch Clean Cut 1/2 inch Limit Cut SG55 torch high duty cycle light and small

$85.99 @ Amazon.com

✪ Plasma Cutter, Input voltage is 110/220V, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum, It is High Frequency Arc Starting. we offer 1 year warranty for this machine.

✪ Cutting current 40Amps DC output, 8mm clean cut, 12mm max severance cutting thickness under 220V 65PSI, This machine very good for home use to cut thin metal, car steel, Come with PT31, work with standard parts, the buyer easy to find the consumables from market.

✪ Input voltage is 110/220V 50/60Hz,It is dual voltage, Automatic indicate the voltage no need to switch by handle from 110v to 220v, Better use 45Amps power breaker for this machine. Machine come with NPT 1/4’’ air connector, very quick to connect machine to air compressor.

✪ Under 110V 30Amps output, Duty cycle 60% in 30Amps, 100% in 25Amps,Under 220V 40Amps output, Duty cycle 60% in 40Amps,100% in 30Amps, Air pressure range from 40-70PSI, Maybe the cutting arc not stable if the air less or over the range.

✪ There are 110v and 220v LED indicator on penal, Very easy to know what kind of voltage come into machine. We supply high quality machine, very lightweight but powerful, Very easy to operate and carry, We also supply quality accessories and torch parts.

CUT50A Inverter Non touch HF Plasma Cutter 110 Voltage 45Amp 1/4 inch Clean Cut 1/2 inch Limit Cut SG55 torch high duty cycle light and small

SSIMDER Plasma Cutter 50Amp Plasma Cutter Machine with Dual Voltage 110V/220V Non-Pilot Arc 1/2 Inch Clean Cut Plasma Cutting Equipment with High Frequency Easy Metal Cutter LCD Display IGBT Inverter

$169.99 @ Amazon.com

★【Powerful Cutting Ability】The CUT 50 Plasma Cutter machine can achieve an ideal clean cut of 1/2" (10mm) and a maximum severance cut of up to 3/4" (20mm). This Plasma Cutter machine's effectiveness in cutting through rough, painted, and rusted surfaces are pretty good, improving work efficiency, and its suitability for various materials.

★【Easy to Operate Plasma Cutter 】SSIMDER CUT50 Plasma Cutter has the convenience of dual voltage control for seamless switching between 110V and 220V. Plasma Cutting equipment is ease of use without the need for maintaining a specific arc distance, allowing users to control cutting quality and speed by adjusting the cutting depth and speed.

★ 【IGBT technical】The Plasma Cutting Equipment has overvoltage, overcurrent as well as overheat protection and uses advanced IGBT technology to cut all metals, making the Plasma Cutter machine more stable and safer. It also has automatic cooling fans and vents to effectively discharge the heat generated, which can better protect the machine and extend the service life of the cutter.

★【Safety Guarantee】SSIMDER CUT 50 portable Plasma Cutter's large LED design provides you with accurate data display, helping you to read all data more easily and clearly without taking off your helmet. Energy saving and noiseless operation, as well as its dual voltage function and sturdy handle make the Plasma Cutter portable and suitable for outdoor working environment.

★ 【Professional Plasma Cutter Machine】SSIMDER is a professional manufacturer of Plasma Cutter Machine providing high-quality Plasma Cutter Consumables and Plasma Cutter Accessories for a long time. We aim to provide a better Plasma Cutter Machine and make Plasma Cutting easier. If you have any questions, feel free to contact us

SSIMDER Plasma Cutter 50Amp Plasma Cutter Machine with Dual Voltage 110V/220V Non-Pilot Arc 1/2 Inch Clean Cut Plasma Cutting Equipment with High Frequency Easy Metal Cutter LCD Display IGBT Inverter

Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI

$189.99 @ Amazon.com

Plasma Cutter, 120V/240V 50A machine with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting

Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A; Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm

Machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumables's working life

Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine

The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room

Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI

Reboot 2PCS PT-31 Plasma Cutter Roller Guide Wheel Spacer Circle Compass Stand Off Fit For Touch Arc Plasma Cutter Torch CUT35 CUT40 CUT45 CUT60 CUT50D LGK40 LG40 (not fit ag60 torch）

$9.99 @ Amazon.com

【PT31 TWO WHEELS SPACER ROLLER GUIDE】The double wheel roller guide can fit PT-31 torch / LG-40 torch, which can work CUT-35,CUT-40,CUT-50D, CUT-60D LGK-40 plasma cutter machine.

【FIT FOR DIFFERENT TYPES OF PT31 TORCH】The positioning screws on the Roller guide can be adjusted to follow and fix different types of PT31 plasma cutting torch.Inner diameter adjustment from 21mm/0.83in to 25mm/0.98in.

【WHEEL HEIGHT CAN BE ADJUSTED】The two wheels of the Roller guide can be adjusted in height, from 45mm/1.77in to 53mm/2.08in.

【PACKAGE INCLUDES】2 pcs PT-31 Roller Guide Assembly.No need to assemble.

【UPGRADED AND THICKEDED】The screw slot does not shift, the roller is smooth and sleek, easy to control the cutting speed.

Reboot 2PCS PT-31 Plasma Cutter Roller Guide Wheel Spacer Circle Compass Stand Off Fit For Touch Arc Plasma Cutter Torch CUT35 CUT40 CUT45 CUT60 CUT50D LGK40 LG40 (not fit ag60 torch）

ARCCAPTAIN 60PCS PT31 Plasma Cutting Consumables Fit CUT-40 CUT-50 CT-312 with Plasma Cutter Torch PT-31 JG-40 LG-40

$14.99 @ Amazon.com

Package Include: 5 Shield Cups, 30 Nozzles, 10 Swirl Baffle, and 15 Electrodes.

Fit More Options: These plasma cutting consumables perfectly fit PT-31, JG-40 and LG40 plasma cutting torch.

Wide Compatibility: These plasma torches consumables suitable works with plasma cutting machines such as CUT35, CUT-40, CUT-40D, LGK-40, CT312, CT312D, CT416, CT416D, CT518, CT518D, CT520D, Super160, Super160P etc.

Premium Material: Our plasma cutter accessories are meticulously crafted from high-quality metal and ceramics, ensuring unmatched durability and reliability, offer a longer lifespan.

Ensure Cutting Quality: Timely replacement of accessories will help you maintain the plasma cutter machine performance and guarantee high-quality cutting results.

ARCCAPTAIN 60PCS PT31 Plasma Cutting Consumables Fit CUT-40 CUT-50 CT-312 with Plasma Cutter Torch PT-31 JG-40 LG-40