Home › F2C AC Power Auto Feeder Mig 130 Gas-less Flux Core Wire Welder Welding Machine Cooling Fan
F2C AC Power Auto Feeder Mig 130 Gas-less Flux Core Wire Welder Welding Machine Cooling Fan
F2C AC Power Auto Feeder Mig 130 Gas-less Flux Core Wire Welder supports 110 volts and 220 volts single phase current and it delivers 50 to 120 AMP welding current.
It has 10% of duty cycle at 150AMP and 35% of duty cycle at 60 AMP and the max open voltage is 37 volt. This F2C AC power welder comes with all the required accessories that you need to perform the welding tasks.
Further, it supports multi-stage feed speed control that provides flexibility in welding works.
F2C AC Power Auto Feeder Mig 130 Gas-less Flux Core Wire Welder comes with torch with full on/off safety control, automatic thermal safety protection, 4 adjustable heating.
And, this F2C MIG 130 gasless flux core wire welder is perfect for welding mild steel, stainless steel and aluminum. Also, you can say it a portable welder because it measures 19.1 x 16.3 x 9.2 inches and weighs 33.1 pounds.
Lastly, the accessories include welding wire, welding mask, chipping hammer, torch, tip and ground cord, if you want to know more click here. Read more…
Duty Cycle: 10% at 105AMP 35% at 60 AMP
Voltage: 110 V / 60 Hz Single Phase
Welding Current: 50-120 AMP
Max open voltage: 37V
Weld able wires: 0.023” to 0.035” mild steel, 0.030” to 0.035” aluminum,0.030” flux-cored
F2C AC Power Auto Feeder Mig 130 Gas-less Flux Core Wire Welder Welding Machine Cooling Fans
【Durable】Made of durable heavy duty stainless steel frame and delicate treatment with black coating to ensure its long-lasting work life and high precision
【Portable】Only 38 lbs lightweight with a carrying handle allows you to easily take it with you to anywhere; Compact design also allows you to easily storage it
【Adjustable】Simply adjust the current flow setting by adjusting the 4 buttons: MIN/MAX/1/2 to set your ideal current flow setting; The wire feeding speed also can be adjusted by a rotary knob, and has 10 levels for you to choose
【Gas Less】Welder uses gas-less flux cored-wire, will self release metal-inert gas while welding to prevent oxidation of the welded part. Two air-vent on the machine to make the temperature lower to extend the service life of the product
【Ideal Choice】Ideal choice for welding mild steel and stainless steel; Great welder choice for personal use or commercial use for shop, home or field; Product included a reel of 0.9mm, 0.55lbs welding wire, a protection mask, a chipping hammer/ wire brush, 2.5m torch, extra 2 tips and ground cord
ZENSTYLE Commercial Grade Portable MIG-130 AC Power Automatic Feeder Gas-less Flux Core Wire 60 AMP Welding Machine (Black)
LOTOS MIG140 140 Amp MIG Wire Welder, Flux Core & Aluminum Gas Shielded Welding with 2T/4T Switch Argon Regulator, Metal Wire Feeder, Black/Red
Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding.
Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 472 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
14.96 X 13.58 X 6.69 Inches (Length X Width X Height)
$290.00 (Save 50%)
Weldpro 155 Amp Inverter MIG/Stick Arc Welder with Dual Voltage 220V/110V welding machine