SSIMDER Welding Electrode Holder Lead ARC Welding Ground Clamp and Welding Cable Stick Electrode Holder Welding Plier Clamp Stinger Copper Jaw Holding Plier

SSIMDER Welding Electrode Holder Lead ARC Welding Ground Clamp and Welding Cable Stick Electrode Holder Welding Plier Clamp Stinger Copper Jaw Holding Plier for 10-800A Welder Machine

$39.99 @ Amazon.com

✔【★Upgraded Welding Electrode Holder and Cable】SSIMDER Welding Electrode Holder Lead Assembly manufactured with 25mm² Highly Flexible Cable.The cable diameter is 0.418 inch.Suitable for both high and low current 10-800A electrode MMA ARC welding machines, suitable for various electrode electrodes, etc.

✔【★ Full length 9.8FT Welding Cable with Clamp】Constructed with Welding Pure Copper Highly Flexible Stranding Cable Wire and Heavy Duty Nylon Body ,Stick/Arc Welding 600 Amp Electrode Holder With Long Cable is total 9.8ft.Equipped with 9.8ft Welding Electrode Ground Clamp to meet most Welding Requirements.Diameter 9mm/0.35 inch plug DKJ 10-25 Dinse Quick Connector,convenient and efficient.You will receive a ready to use fully assembled lead, no Tool Accessories required.

✔【★600A Welding Plier】Upgraded Welding Jaw Holding Plier is made of High Quality Brass material with Ergonomic Handle. The high temperature/high impact-resistant molded fully insulated body to protect against electrical shock, not easy to oxidize with heat, strong bite force.And the Welding Electrode Rod holder have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so Welding Electrode Holder will not slip while welding.

✔【★Copper Welding Ground Clamp】This Welder Copper Plier Ground Clamp uses a copper chuck with strong current.Large hex screw cable connection assures a tight and safe cable connection. Welder Ground Wire Pliers has a large contact area for an effective ground connection. Welder ground clamp and cable design eliminates arc blowing and facilitates fast grounding spot changing.High temperature resistance, suitable for long-term use.

✔【★Professional Manufacturer】SSIMDER is a professional welding machine,welding equipment & accessories manufacturer, we aim to provide a better welding tools and welder accessories, such as Welding Electrode Holder, Welding Plier,Welding Ground Clamp,Welding Cable and make welding easier. If you have any questions, feel free to contact us.

SSIMDER Welding Electrode Holder Lead ARC Welding Ground Clamp and Welding Cable Stick Electrode Holder Welding Plier Clamp Stinger Copper Jaw Holding Plier for 10-800A Welder Machine

SSIMDER Stick Welder Machine ARC-200S & 600Amp Welding Electrode Holder Lead Assembly

$105.99 @ Amazon.com (Save 9%)

【Dual Voltage ARC Stick Welder】The new ARC-200S stick welder supports 110v & 220v input voltage, the real current is 200A. This mini welding machine weighs only 5 lbs, it's lightweight and portable so you can take it anywhere for welding.

【Intelligent LCD Digital Display】 This ARC-200S stick welder machine has an intelligent LCD digital screen, which displays the recommended size of the electrode while adjusting the current. This stick welder includes ARC mode, hot start function, arc force and TIG mode, you can switch to different modes and adjust accordingly. Great for beginners.

【Adjustable Hot Start and Arc Force】 The ARC-200S ARC Welder comes with Adjustable Hot Start Function, which helps to improve the reliability of ARC Striking and Reduce the Spatter while Welding. The ARC Force Function on this ARC Welder can adjust resistance of ARC to Minimize electrode sticking.

【Upgraded Welding Electrode Holder and Cable】SSIMDER Welding Electrode Holder Lead Assembly manufactured with 25mm² Highly Flexible Cable.The cable diameter is 0.418 inch.Suitable for both high and low current 10-800A electrode MMA ARC welding machines, suitable for various electrode electrodes, etc

【 Full length 9.8FT Welding Cable with Clamp】Constructed with Welding Pure Copper Highly Flexible Stranding Cable Wire and Heavy Duty Nylon Body ,Stick/Arc Welding 600 Amp Electrode Holder With Long Cable is total 9.8ft.Equipped with 9.8ft Welding Electrode Ground Clamp to meet most Welding Requirements.Diameter 9mm/0.35 inch plug DKJ 10-25 Dinse Quick Connector,convenient and efficient.You will receive a ready to use fully assembled lead, no Tool Accessories required.

SSIMDER Stick Welder Machine ARC-200S & 600Amp Welding Electrode Holder Lead Assembly

YESWELDER Welding Electrode Holder 500Amp for SMAW(MMA) Stick Electrode Jaw Holding Plier Copper Electrode Clamp for Welding Machine ARC Welder

$15.99 @ Amazon.com

[MAXIMUM AMPERAGE] Suitable for up to 500A.

[COMFORTABLE OPERATION] Great for most Arc, MMA, Hand Stick welding jobs. Easy to operate with newly designed level for good hand clearance and better hold.

[EXCELLENT QUALITY] High conductivity and improved cable connection, which is more secure and easy to replace.

[SAFETY DESIGN] Heat resistant handle, made of arc-resistant insulation and impact resistant material.

[METHOD APPLICATION] This 500A welding electrode holder connects to the welding cable and conducts the welding current to the electrode. The insulated handle is used to guide the electrode over the weld joint and feed the electrode over the weld joint and feed the electrode into the weld puddle as it is consumed.

YESWELDER Welding Electrode Holder 500Amp for SMAW(MMA) Stick Electrode Jaw Holding Plier Copper Electrode Clamp for Welding Machine ARC Welder

JACAZOOY Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable for Welder

$25.99 @ Amazon.com

✔️The Cable Connector of Welding Ground Clamp/Welding Electrode Holder is made of copper and insulating rubber, which is highly conductive, durable, corrosion-resistant, drop-resistant, and not easy to crack. The Diameter of Cable Connector is Approx. Φ9mm / 0.35 inch.

✔️The Welding Ground Clamp is suitable for a welding arc. Features wide grip jaws to ensure a firm connection. Grounds work to be welded to a good electrical ground earth.

✔️ This Welding Electrode Holder is made of copper clamp head, strong current. It is not easy to scald with pure copper forging. Also, the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.

✔️The welding stinger, Welding Ground Clamp and Cable Connector have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.

✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly.

JACAZOOY Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable for Welder

Welding Electrode Holder Cuwiny 300AMP High Quality Copper Electrode Clamp Jaw Holding Plier Fit for ARC Welder Welding Machine Stick Electrode Welding American Design

$15.19 @ Amazon.com

This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)

Used # 1 AWG Gauge Cable and High-quality Copper.

Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.

The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.

Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.

Welding Electrode Holder Cuwiny 300AMP High Quality Copper Electrode Clamp Jaw Holding Plier Fit for ARC Welder Welding Machine Stick Electrode Welding American Design

SHIELD METAL ARC WELDING ELECTRODE MAKING AND FABRICATION

$50.00 @ Amazon.com

SHIELD METAL ARC WELDING ELECTRODE MAKING AND FABRICATION

SSIMDER Stick Welder 160Amp ARC/TIG Welder Machine&SSIMDER 600A Welding Electrode Holder Lead Assembly

$120.99 @ Amazon.com (Save 22%)

【Dual Voltage ARC/Stick Welder】S Simder ARC-140N is a 110v 220v Dual Voltage Stick Welder Machine, with Output Current 160Amp. This Stick Welding Machine is Light Weight and Portable, weighs only 11 lbs. You Can Carry it to Anywhere for Welding.

【Hot Start and Arc Force Function】 The ARC-140N ARC Welder comes with Adjustable Hot Start Function, which helps to improve the reliability of ARC Striking and Reduce the Spatter while Welding. The ARC Force Function on this ARC Welder can adjust resistance of ARC to Minimize electrode sticking.

【ARC & Lift TIG 2 in 1 Function】This ARC-140N is also an ARC & Lift TIG 2 in 1 Welding Machine, can be used as ARC MMA stick welder or Lift TIG welder(TIG Torch&Consumables need to purchase Separately).

【Upgraded Welding Electrode Holder and Cable】SSIMDER Welding Electrode Holder Lead Assembly manufactured with 25mm² Highly Flexible Cable.The cable diameter is 0.418 inch.Suitable for both high and low current 10-800A electrode MMA ARC welding machines, suitable for various electrode electrodes, etc.

【 Full length 9.8FT Welding Cable with Clamp】Constructed with Welding Pure Copper Highly Flexible Stranding Cable Wire and Heavy Duty Nylon Body ,Stick/Arc Welding 600 Amp Electrode Holder With Long Cable is total 9.8ft.Equipped with 9.8ft Welding Electrode Ground Clamp to meet most Welding Requirements.Diameter 9mm/0.35 inch plug DKJ 10-25 Dinse Quick Connector,convenient and efficient.You will receive a ready to use fully assembled lead, no Tool Accessories required.

SSIMDER Stick Welder 160Amp ARC/TIG Welder Machine&SSIMDER 600A Welding Electrode Holder Lead Assembly

hynade Welding Electrode Holder,300A Heavy Duty Stick Welding Stinger Electrode Clamp for Arc MMA Welder

$12.99 @ Amazon.com

Specification: 300A electrode holder ,hold rods up to 1/4",use 2/0 AWG gauge cable

Material:The electrode clamp body made of super tough Nylon plastic ,the Jaw adopt high conductivity copper and the Insulation around jaws is solid heat-resistant stuff .This is a solidly built and durable holder

Design: The welding stick holder have jaws that meet squarely and aren't loose or wobbly. High strenght coiled spring for a maximun grip of the electrode

Package included: 1 pieces welding electrode holder +cable connector and one allen wrench

Application: The rod holder suit for various kinds of stick welding rods electrodes,Ideal for MMA ARC Welders

hynade Welding Electrode Holder,300A Heavy Duty Stick Welding Stinger Electrode Clamp for Arc MMA Welder

Hobart 770028 Welding Holder Electrode 400 Amp - Screw Type

$24.99 @ Amazon.com

Accepts rods up to 5/16"

Electrodes burn within 1" from the head and can be bent to any angle and still be held secure.

Item Package Dimension: 12.3" L x 4.5" W x 2.8" H

Item Package Weight: 1.4 lb

Hobart 770028 Welding Holder Electrode 400 Amp - Screw Type

Lenco Model AF-25 Electrode Holder 250 Amp, Item# 01030

$29.75 @ Amazon.com

MADE IN USA

250 Amp

Up to 3/16" Electrodes

2/0 Cable Capacity

8-1/2" Length

Lenco Model AF-25 Electrode Holder 250 Amp, Item# 01030