YESWELDER Welding Electrode Holder pure copper Brass Materials 300AMP,for SMAW

YESWELDER Welding Electrode Holder pure copper Brass Materials 300AMP,for SMAW(MMA) Stick Electrode Welding

$16.99 @ Amazon.com

[PURE COPPER]Our clamps has a higher copper content than others.Therefore, better conductivity ,safer and improved cable connection.

[MAXIMUM AMPERAGE] Suitable for up to 300A.

[COMFORTABLE OPERATION] Great for most Arc, MMA, Hand Stick welding jobs. Easy to operate with newly designed level for good hand clearance and better hold.

[SAFETY DESIGN] Heat resistant handle, made of arc-resistant insulation and impact resistant material.

[METHOD APPLICATION] This 300A welding electrode holder connects to the welding cable and conducts the welding current to the electrode. The insulated handle is used to guide the electrode over the weld joint and feed the electrode over the weld joint and feed the electrode into the weld puddle as it is consumed.

YESWELDER Welding Electrode Holder pure copper Brass Materials 300AMP,for SMAW(MMA) Stick Electrode Welding

SSIMDER Welding Electrode Holder Lead ARC Welding Ground Clamp and Welding Cable Stick Electrode Holder Welding Plier Clamp Stinger Copper Jaw Holding Plier for 10-800A Welder Machine

$39.99 @ Amazon.com

✔【★Upgraded Welding Electrode Holder and Cable】SSIMDER Welding Electrode Holder Lead Assembly manufactured with 25mm² Highly Flexible Cable.The cable diameter is 0.418 inch.Suitable for both high and low current 10-800A electrode MMA ARC welding machines, suitable for various electrode electrodes, etc.

✔【★ Full length 9.8FT Welding Cable with Clamp】Constructed with Welding Pure Copper Highly Flexible Stranding Cable Wire and Heavy Duty Nylon Body ,Stick/Arc Welding 600 Amp Electrode Holder With Long Cable is total 9.8ft.Equipped with 9.8ft Welding Electrode Ground Clamp to meet most Welding Requirements.Diameter 9mm/0.35 inch plug DKJ 10-25 Dinse Quick Connector,convenient and efficient.You will receive a ready to use fully assembled lead, no Tool Accessories required.

✔【★600A Welding Plier】Upgraded Welding Jaw Holding Plier is made of High Quality Brass material with Ergonomic Handle. The high temperature/high impact-resistant molded fully insulated body to protect against electrical shock, not easy to oxidize with heat, strong bite force.And the Welding Electrode Rod holder have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so Welding Electrode Holder will not slip while welding.

✔【★Copper Welding Ground Clamp】This Welder Copper Plier Ground Clamp uses a copper chuck with strong current.Large hex screw cable connection assures a tight and safe cable connection. Welder Ground Wire Pliers has a large contact area for an effective ground connection. Welder ground clamp and cable design eliminates arc blowing and facilitates fast grounding spot changing.High temperature resistance, suitable for long-term use.

✔【★Professional Manufacturer】SSIMDER is a professional welding machine,welding equipment & accessories manufacturer, we aim to provide a better welding tools and welder accessories, such as Welding Electrode Holder, Welding Plier,Welding Ground Clamp,Welding Cable and make welding easier. If you have any questions, feel free to contact us.

SSIMDER Welding Electrode Holder Lead ARC Welding Ground Clamp and Welding Cable Stick Electrode Holder Welding Plier Clamp Stinger Copper Jaw Holding Plier for 10-800A Welder Machine

Reboot Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

$14.99 @ Amazon.com

🛒Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.

🛒Used # 1 AWG Gauge Cable

🛒Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.

🛒Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet

🛒100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance.

Reboot Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

JRangelp Welding Electrode Holder 300AMP Heave-Duty Jaw Holding Pliers Copper Electrode Clamp Stick Electrode Welding Pliers for MIG/ARC Welding Machine

$12.99 @ Amazon.com

☑High Standard☑ This electric welding clamp is made of high-quality copper material, and the one-piece forging process of pure copper is strong and durable, and it is not easy to rust. In addition, the grip is made of non-slip material, not easy to slip, convenient and practical

☑Stable Jaw☑ This welding electrode holder supports multi-angle clamping, such as 48°, 90°, 180°. In addition, the clamping mouth adopts a special diamond-shaped clamping mouth design, which has high occlusal strength, and the welding rod is not easy to fall off, which greatly improves work efficiency.

☑Widely Applications☑ This welding clamping is used for welding table legs, railings, pipes and more. Furthermore, it is suitable for most 300A arc, MMA, handheld welding operations and suitable for various rod-shaped electrodes of 2.5-3.2mm, etc.

☑Easy to Install☑ First unscrew the screw, remove the upper part, then connect the wire, and finally push the copper sheet into the handle to use

Heat insulation block, heat insulation conduction handle

JRangelp Welding Electrode Holder 300AMP Heave-Duty Jaw Holding Pliers Copper Electrode Clamp Stick Electrode Welding Pliers for MIG/ARC Welding Machine

Welding Electrode Holder Cuwiny 300AMP High Quality Copper Electrode Clamp Jaw Holding Plier Fit for ARC Welder Welding Machine Stick Electrode Welding American Design

$15.19 @ Amazon.com

This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)

Used # 1 AWG Gauge Cable and High-quality Copper.

Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.

The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.

Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.

Welding Electrode Holder Cuwiny 300AMP High Quality Copper Electrode Clamp Jaw Holding Plier Fit for ARC Welder Welding Machine Stick Electrode Welding American Design

JACAZOOY Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable for Welder

$25.99 @ Amazon.com

✔️The Cable Connector of Welding Ground Clamp/Welding Electrode Holder is made of copper and insulating rubber, which is highly conductive, durable, corrosion-resistant, drop-resistant, and not easy to crack. The Diameter of Cable Connector is Approx. Φ9mm / 0.35 inch.

✔️The Welding Ground Clamp is suitable for a welding arc. Features wide grip jaws to ensure a firm connection. Grounds work to be welded to a good electrical ground earth.

✔️ This Welding Electrode Holder is made of copper clamp head, strong current. It is not easy to scald with pure copper forging. Also, the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.

✔️The welding stinger, Welding Ground Clamp and Cable Connector have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.

✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly.

JACAZOOY Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable for Welder

YESWELDER TIG Tungsten Electrode Blue Storage Tube for WL20 Welding Tungsten Rod

@ Amazon.com

[STORAGE TUBE] To store your new/used/sharpened tungten electrodes in the metal tube. Keeping your tungsten electrodes dry and ready to use (tungsten electrodes not included).

[MATERIAL] Made of superior quality aluminum, handy and durable.

YESWELDER TIG Tungsten Electrode Blue Storage Tube for WL20 Welding Tungsten Rod

500A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Black

$22.99 @ Amazon.com

GREAT FOR most Arc, MMA, Hand Stick welding jobs

ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch

CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with.

MATERIALS:Forging brass.PACKAGE:1 electrode holder included.

HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections.

500A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Black

Electrode Holder 800A Capacity Insulated Copper Welding Clamp for Welding Machine Brass Red Copper(Brass)

$20.59 @ Amazon.com

GOOD CONDUCTIVITY---Made of high quality copper, the electrode holder has good conductivity, with quick heat dissipation

ANTI-SCALD HANDLE---With special insulation heat-resistant material, the electrode holder is non-conductive, anti-scald, ergonomic design for comfortable holding feeling

HIGH QUALITY SPRING---Adopting high quality spring, the electrode holder has strong elasticity, could clamp firmly and steadily, perfect helping tool for welding

SMALL SIZE---The whole length of the electrode holder is 30 cm/11.8 in (brass), 28.5 cm/11.2 in (red copper), the weight 640-649 g / 22.6-22.9 oz, easy to carry and convenient to use

SUPERIOR AFTER SALE SUPPORT---Please feel to contact us for your any problems about our product. It is our pleasure to service you. Do not doubt your importance to us

Electrode Holder 800A Capacity Insulated Copper Welding Clamp for Welding Machine Brass Red Copper(Brass)

YESWELDER Welding Electrode Holder 300A&E7018 3/32'' 5LB Welding Rod

$37.00 @ Amazon.com

MAXIMUM AMPERAGE-Suitable for up to 300A

EXCELLENT QUALITY-High conductivity and improved cable connection, which is more secure and easy to replace.

low-hydrogen iron powder type electrode that produces high quality x-ray welds. It can be used in all positions on AC or DC reverse polarity welding current.

All position welding, recommended for welding medium grade carbon steels where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional electrodes.

Steady arc, low spatter,excellent re-striking ability and high deposition efficiency.

YESWELDER Welding Electrode Holder 300A&E7018 3/32'' 5LB Welding Rod