Metal Cutting Shears

HURRICANE 10 Inch Aviation Tin Snips, Heavy Duty Metal Cutter Shears for Cutting Sheet Metal, Straight Cut, Chrome Vanadium Steel

$13.99 @ Amazon.com (Save 30%)

【Straight Regular Cut】HURRICANE 10 Inch Aviation Tin Snips, Cuts straight and wide curves to the left and right, ensuring a secure hold and precise cuts. Ideal for Cutting Sheet Metal, copper, aluminum, plastic, thick cardboard, chicken wire, and hardware cloth.

【Longest Lasting Edge】Chrome Vanadium Steel, Serrated edge blades with sanding finish for maximum strength, durability, and long lifetime.

【Cut Capacity of Tin Snip】 With a cutting thickness range of up to 18 gauge (1.2mm) cold-rolled steel sheet, 18 gauge (1.2mm) Galvanized sheet, and 22 gauge (0.7mm) stainless steel.

【Comfortable Grips】Ergonomical Tyregrip Handle with rubberized grip for comfort and control.

【Safety and High Efficiency】Locking latch prevents damage to cutting edge when stored. Spring-assisted latch on metal snips for fast one-handed operation. Tips- Please always wear gloves when you’re working!

HURRICANE 10 Inch Aviation Tin Snips, Heavy Duty Metal Cutter Shears for Cutting Sheet Metal, Straight Cut, Chrome Vanadium Steel

WEN Metal Shear, Swivel Head, Variable Speed, 18-Gauge, 4-Amp (3650)

$42.72 @ Amazon.com

Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute

Attack up to 20 gauge stainless steel and 18 gauge sheet metal

Lightweight design limits fatigue during operation

Utilizes a powerful 4-amp motor, curling the metal as it cuts

Swiveling head rotates a full 360 degrees to meet the needs of any project

WEN Metal Shear, Swivel Head, Variable Speed, 18-Gauge, 4-Amp (3650)

DEWALT Metal Shear/Cutter Drill Attachment, Impact Ready, 360 Degree Pivoting Head, Cuts 18GA Material (DWASHRIR)

$49.98 @ Amazon.com (Save 31%)

Able to cut up to 18GA material

360 degree swivel head for maneuverability

Connects via standard 1/4-inch hex shank

Compatible with most 18V-20V impact driver and drills

DEWALT Metal Shear/Cutter Drill Attachment, Impact Ready, 360 Degree Pivoting Head, Cuts 18GA Material (DWASHRIR)

Wild Edge Electric Metal Shear, 14 Gauge 5.0 Amp Variable Speed Swivel Head Heavy Duty Sheet Metal Cutter

$47.95 @ Amazon.com

Double-cut blade design and powerful 5.0-amp motor of this tool work together to deliver fast, clean cuts on thin metal steel bars, creating curled pieces with a width of 1/4 inch. With a variable speed control of 0-2700 strokes per minute, you can easily adjust the cutting speed to work on different materials simply by adjusting the pressure on the trigger, from light to heavy

The tool is capable of cutting up to 14 gauge thickness sheet metal and 15 gauge stainless steel, making it suitable for a variety of cutting applications such as metal roofing, wire mesh, flashing, and more. Its maneuverability allows it to be used in different situations, and its multi-functional design makes it a versatile tool for a range of cutting needs

Full 360° swiveling head design of this tool allows it to meet the demands of most common projects. It is especially effective at cutting large circles, curves, and irregular shapes through convenient and flexible operation

Three durable blade cutter reduces metal deformation and ensures smooth long straight line cutting. It also enables continuous cutting with high efficiency and accuracy

It features a two-finger pressure-sensitive trigger and a lock-on button to ensure precise cutting controllability. Its lightweight design and ergonomic over-mold grip are designed to reduce fatigue during long periods of operation

Wild Edge Electric Metal Shear, 14 Gauge 5.0 Amp Variable Speed Swivel Head Heavy Duty Sheet Metal Cutter

TOOLMAK Aviation Tin Snips 8 Inch Heavy Duty Metal Cutter, Straight Shears with Stainless Steel Blade & Comfort Grips, Multifunction Cutting of Branches, Cable Wires, Thin Iron, Cardboard

$9.99 @ Amazon.com

【Excellent Craftsmanship】Constructed of strong and durable stainless steel, Does not rust easily, HRC55 High hardness, The surface of the blade is finely polished and has a very beautiful appearance.

【Serrated Edge】Robust and durable blade with non-slip serrated design, Neat knife edge, Effectively prevents sliding or deflection when cutting items, Good for metal cutting and other scenes.

【Comfortable Grip】Two-color handle is not easy to slip when using,ergonomically designed handle is wrapped with a non-slip sleeve made of TPR material, Self- tensioning spring is convenient.

【Safety Lock Design】There is a safety fastener that can keep scissors close, After use, the lock can be buckled to reduce space occupation and prevent accidental injury by sharp edges.

【Multi-purpose Use】Precision crafted multifunctional industrial scissors can be effectively applied to horticulture, branch, Thin Iron, Cardboard, Potted Plants, plastic tubes, Fishing Net, etc.

TOOLMAK Aviation Tin Snips 8 Inch Heavy Duty Metal Cutter, Straight Shears with Stainless Steel Blade & Comfort Grips, Multifunction Cutting of Branches, Cable Wires, Thin Iron, Cardboard

TOOLEAGUE Aviation Tin Snips for Cutting Metal Sheet Tin Cutting Shears with Forged Blade, Heavy Duty Metal Cutter Long Straight Cut 12 inches Metal Shears

$15.99 @ Amazon.com

HIGH QUALITY MATERIAL: Made from high-quality CR-V steel. With overall heat treatment, higher hardness, and long lifetime. the Compound action snip has a durable structure, sharp tooth tip, and easy cutting.

WIDE APPLICATION: Cutting thickness range up to 1.2mm carbon steel and 0.7mm stainless steel, you can cut these for metal wire, fine, keel, aluminum, sheet metal, keel, square steel pipe, etc.

SAFE &HIGH EFFICIENCY: The metal safety lock is between the strong handles. It’s easy to open and close for a conventional security system. Serrated cutting edges prevent materials from slipping during use. It’s safe and easy to do work!

EASY CUTTING-Compound leverage multiplies handle force to cutting blades by 7:1 for significantly less fatigue. After multiple tests, the non-slip grip is easier to use and more stable.

PACKAGE CONTENT:Item includes 1 x tin snips long straight cut.

TOOLEAGUE Aviation Tin Snips for Cutting Metal Sheet Tin Cutting Shears with Forged Blade, Heavy Duty Metal Cutter Long Straight Cut 12 inches Metal Shears

Crescent Wiss 9-1/4" Metalmaster Offset Straight and Left Cut Aviation Snips - M6R , Red

$16.99 @ Amazon.com (Save 50%)

Cuts low carbon, cold-rolled 18 gauge steel

Non-slip, serrated jaws of tough molybdenum steel hold material firmly and spread cutting force uniformly across blade edge

Offset blades keep hands clear of metal

Cuts straight lines and left arcs

High-speed vibratory finish provides excellent blade durability and a consistent, high-end aesthetic

Non-slip comfort grips provide superior control and comfort

Crescent Wiss 9-1/4" Metalmaster Offset Straight and Left Cut Aviation Snips - M6R , Red

SHALL Electric Metal Cutting Shear, 4.0-Amp Corded Sheet Metal Cutter, Variable Speed with 360 Degree Swivel Head, Continuous Cutting, Clean Cut for 14GA Sheet Metal & 16GA Stainless Steel, 2500 SPM

$49.99 @ Amazon.com

Clean cut: Double cut design for creating a 1/4 inch curled metal thin strip during operation by the double-cut blade. Compared with traditional manual metal shears and single cut shears that creating lots of tiny metal chips and wastes, ours 4-amp electric power metal shear delivers fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, ours key advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish

360 degree swivel head: Cutter head can be adjusted to a desired position for delivering comfortable cuts from any angle or direction. Offer convenience for cutting straight lines, large curves, circles and irregular shapes. Loosen the three hex head bolts, firmly grip the cutter head and twist it to the desired position then tighten the three hex bolts

Variable speed operation: Speed (0-2500 SPM) is allowed to vary by users. Press trigger lightly to cut slowly and press trigger heavily to cut quickly. For stop cutting, just release the trigger to turn off the shear. Flexible and easy to control the cutting speed. Variable Speeds for users to cut specific materials in different situations

Cutting capacity: Cutting up to 14 gauge sheet metal and 16 gauge stainless steel. In addition, applicable for cutting wire mesh, plastic, leather, carpet, pvc pipe, cardboard and so on. Multi-functional, meeting most of your needs. Power cable: 6-1/2 FT (2M), long enough to reach the socket far away

Continuous cutting: Able to deliver continuous cutting for users to reduce finger fatigue. For continuous cutting, squeeze the trigger switch then press the lock-on button on the side of the handle. The lock-on button will deactivate once the trigger is released. Note: if the shear be jammed while cutting, release the trigger and unplug the shear immediately

SHALL Electric Metal Cutting Shear, 4.0-Amp Corded Sheet Metal Cutter, Variable Speed with 360 Degree Swivel Head, Continuous Cutting, Clean Cut for 14GA Sheet Metal & 16GA Stainless Steel, 2500 SPM

Amazon Basics Straight Cut Aviation Snip

$13.29 @ Amazon.com

Straight-cut aviation tin snip with high-leverage design and serrated-edge blade for efficient cutting

Easily cuts through thin sheets of aluminum tin and metal, including up to 18-gauge steel and up to 22-gauge stainless steel

Made of premium chrome vanadium steel processed with a high-frequency heat treatment

2-colored handle with a rubberized grip helps ensure a secure hold and precise cuts; latch locks tool shut when not in use to protect the blade; one-handed auto release

Backed by an Amazon Basics limited one-year warranty

Amazon Basics Straight Cut Aviation Snip

Electric Drill Plate Cutter- Electric Drill Shears for Cutting Flat Metal Sheets with a Thickness of 0.03 Inches or Less - Authentic Goods from The Source

$25.99 @ Amazon.com

✅【Strong Cutting Ability】This electric drill attachment cutter nibbler boasts strong cutting ability and a faster cutting speed compared to other sheet metal cutting tools. It is specifically designed for use with handheld drills, making it a convenient and efficient addition to your toolkit. With its superior cutting power, it can easily replace ordinary scissors and knives, saving you valuable work time and improving your overall productivity.

✅【Electric Drill Plate Cutter Accessories】 With its high hardness high manganese steel cutting head, this nibbler attachment can handle steel sheets (<0.02 in. thick), iron sheets (<0.03 in. thick), copper sheets (<0.037 in. thick), and aluminum sheet (<0.037 in. thick).

✅【Multi-purpose Application】 The electric drill shears board cutting machine is designed to cut flat sheet metal that is less than 0.03 inches thick. However, it is not suitable for cutting sheet metal that has blended, ribbed, special-shaped, or welded shapes, or any non-metallic materials. If the tool gets stuck during operation, it should not be forced forward. Instead, the drill should be set to reverse to allow for a safe and automatic exit.

✅【Points to Note】 The cutting force is influenced by the torque of the electric drill, with a greater torque resulting in a stronger cutting force. We do not recommend cutting stainless steel and special high-hardness alloy materials with this metal cutter, as doing so can damage the machine. If stainless steel must be cut, the thickness of the material should not exceed 0.01 inches. Additionally, please note that this drill is not suitable for cutting plastics.

✅【Safe and Durable】This nibbler metal cutter is safe and durable, thanks to its design that eliminates contact with the saw blade or blades, preventing hand injuries. Additionally, it features a robust metal gearhead that enhances its longevity. Moreover, it is easy to fit onto the electric drill head, without requiring any specialized tools, saving you time and effort. Please note that the electric drill is not included.

✅【Package Content】 The electric sheet metal cutter drill attachment toolbox contains an electric drill plate cutter (electric drill not included), a manual, an Allen wrench, a wrench, a connecting rod, and a spring for fixing. All the tools you need are included in the package.

Electric Drill Plate Cutter- Electric Drill Shears for Cutting Flat Metal Sheets with a Thickness of 0.03 Inches or Less - Authentic Goods from The Source