Quaintfab - 32" H x 21" W x 30" L Plasma Cutting Table
Product DescriptionSturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor.
23 Replaceable Slats-The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel.
32"H x 21"W x 30" L-The dimensions are designed to let you cut and work at the perfect height.
Plasma Cutting Solution - The Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material.
Product Details| Brand: | Quaintfab |
|---|
| Model #: | 7170022 |
|---|
| Color: | Black |
|---|
| Price: | $189.99 (Save 5%) |
|---|
Quaintfab - 32" H x 21" W x 30" L Plasma Cutting Table
Quaintfab - 32" H x 21" W x 30" L Plasma Cutting Table
Product DescriptionPlasma Cutting Solution - The PrimeWeld Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material.
Sturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor.
Work At The Right Height - This slatted-top, steel cutting table is the place to support your workpiece while plasma cutting or welding. The dimensions are 32"H x 21"W x 30" L and are designed to let you cut and work at the perfect height.
Replaceable Slats - The PrimeWeld Plasma Cutting Table comes with 23 replaceable slats. The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel.
PrimeWeld's Promise - If for any reason you're not satisfied with your Plasma Cutting Table, simply reach out to Customer Support and we'll make things right for you! All employees, parts and customer service Is located in the USA!
Product Details| Brand: | PRIMEWELD |
|---|
| Model #: | P123 |
|---|
| Color: | Black |
|---|
| Price: | $350.00 |
|---|
PrimeWeld Plasma Cutting Table with Replaceable Slats, Plasma Cutter Table, Cutting Equipment, 32" H x 21" W x 30" L
Quaintfab - 32" H x 21" W x 30" L Plasma Cutting Table
Product DescriptionMetal-Fabricating Jobs Are Easier When You Use Eastwood'S Plasma Cutting Table.
Sturdy, Carbon Steel Construction
Supports Up To 250 Lbs.
23 Replaceable Slats
32 in.H X 21 in.W X 30 in. L
Product Details| Brand: | Eastwood |
|---|
| Model #: | [PO] |
|---|
| Color: | Black |
|---|
| Dimensions: | 30 X 21 X 32 inches (Length X Width X Height) |
|---|
| Price: | $259.99 |
|---|
Eastwood Plasma Cutting Table Sturdy Carbon Steel Construction Workbench Table for Workshop Supports Up to 250 Lbs
Quaintfab - 32" H x 21" W x 30" L Plasma Cutting Table
Product DescriptionWeld our kit together, then bolt onto your 36"x24" service cart (NOT included). Seal it up, add water and then you will have the best plasma table roll-around available. Actual outside dimensions of finished table and cart are 35.75”L x 23.75”W x 35.5"H.
*NOT* included: Service Cart or Plasma Cutter - Requires Harbor Freight #62587 - 36"x 24" service cart, will potentially work with other brands - Includes: plasma table ends, 4" flat-bar sides, cutting slats, long reach clamp, wave break, (6) cord holders, drain plug & new hardware.
Clamp option - 5/8" post for fixture/weld tables. Edge clamp style for our table & standard fab. tables up to 9/16" thick. The clamp is perfect for holding our Plasma Stencils and straight edges.
Cutting slats are 1/8" x 1 1/2" flat bar. 6 gallons of water leaves 5 1/2" of air space to limit splash back. The included wave break also prevents splashing when rolling around.
Made in USA!
Product Details| Brand: | 911 motorsports |
|---|
| Dimensions: | 35.75 X 23.75 X 6 inches (Length X Width X Height) |
|---|
| Price: | $374.95 |
|---|
36"x24" Plasma Cutter - Water Table Conversion Kit - Edge Clamp
Quaintfab - 32" H x 21" W x 30" L Plasma Cutting Table
Product DescriptionTub NOT included - Comes with long reach clamp, plasma table frame & cutting slats. This round plasma table will sit on top a 55 gallon drum or common wash tub and includes an adjustable clamp to hold our Plasma Stencils and cutting guides.
Clamp option - 5/8" post for fixture/weld tables. Edge clamp style for our table & standard fab. tables up to 9/16" thick. The clamp is perfect for holding our Plasma Stencils and straight edges.
Fits standard 55 gallon drums or Behrens 17 gal. wash tub -NOT included- which are in stock at most farm & hardware stores for around $35.
All of the sparks/slag and most of the smoke is captured with 6" air gap above the water. The usable cutting area is 22" or 24" with the 17 gal tub. Cutting slats are 1/8" x 1 1/2" flat bar. Requires welding, about 10 minutes.
Made in USA!
Product Details| Brand: | 911 motorsports |
|---|
| Dimensions: | 24 X 4.5 X 4.5 inches (Length X Width X Height) |
|---|
| Price: | $149.95 |
|---|
Round - Plasma Cutter Water Table for 55 gal. drum/ 17 gal. tub - Edge Clamp
Quaintfab - 32" H x 21" W x 30" L Plasma Cutting Table
Product Descriptionfit SG-55 AG-60 WSD-60 Plasma Cutter Torch
Roller Guide Wheel Spacer
Fit Pilot Arc Starting
inner diametre : 27mm
Work with the shroud shield cup no Groove
Product Details| Brand: | RIVERWELD |
|---|
| Model #: | Roller Guide Wheel |
|---|
| Dimensions: | 3.149606296 X 2.362204722 X 0.6299212592 inches (Length X Width X Height) |
|---|
| Price: | $8.00 |
|---|
RIVERWELD SG-55 AG-60 Plasma Cutter Roller Guide Wheel Spacer Circle Compass Stand Off fit Pilot Arc Starting
Quaintfab - 32" H x 21" W x 30" L Plasma Cutting Table
Product DescriptionTub NOT included - Comes with long reach clamp, plasma table frame & cutting slats. This square plasma table will sit on top a common wash tub and includes an adjustable clamp to hold our Plasma Stencils and cutting guides.
Clamp option - 5/8" post for fixture/weld tables. Edge clamp style for our table & standard fab. tables up to 9/16" thick. The clamp is perfect for holding our Plasma Stencils and straight edges.
Fits Behrens #62/ 15.5 gal. square tub -NOT included- which are in stock at most farm & hardware stores for around $35, or you can buy them online here for a little more. https://www.amazon.com/Behrens-62-Stainless-Steel-Tub/dp/B00002N84Q
All of the sparks/slag and most of the smoke is captured with 6" air gap above the water. The usable cutting area is 20"x19". Cutting slats are 1/8" x 1 1/2" flat bar. Laser cut from 1/8" steel and requires welding, about 10 minutes.
Made in USA!
Product Details| Brand: | 911 motorsports |
|---|
| Dimensions: | 20 X 4.5 X 4.5 inches (Length X Width X Height) |
|---|
| Price: | $149.95 |
|---|
Square - Plasma Cutter Water Table for 15.5 gal. tub - Edge Clamp
Quaintfab - 32" H x 21" W x 30" L Plasma Cutting Table
Product Description【EASY TO CUT, POWERFUL PERFORMANCE】Automatic dual-voltage 110/220V. With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. NOTE: DO NOT power on until the screen turns off and the fan stops working!
【EASY TO ASSEMBLE】With a plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. Only takes 30 seconds and you can start cutting. Recommended current is 50A. For 110V, use 20-40 psi; for 220V, use 30-60 psi.
【PORTABLE & LIGHTWEIGHT】This plasma cutter machine only weighs 13 pounds, easy to carry. It's also tiny and light enough to move with strap in any workplace(strap included).
【ADVANCED DIGITAL TECHNOLOGY】You can adjust the post-flow time from 5-15 seconds to have a clean cut. Also could select 2T/4T to have a comfortable working experience. The exclusive Large LED design provides you with an accurate data display and helps you read all data easier and more clearly without taking off your helmet.
【SAFETY & DURABLE】 ARCCAPTAIN welder machine have passed a variety of professional tests and certifications including TÜV and ANSI standards before leaving our factory.
Product Details| Brand: | ARCCAPTAIN |
|---|
| Model #: | CUT50 |
|---|
| Size: | Black/Red |
|---|
| Color: | Cut 50 110v/220v |
|---|
| Dimensions: | 13 X 6 X 8 inches (Length X Width X Height) |
|---|
| Price: | $249.99 |
|---|
ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY
Quaintfab - 32" H x 21" W x 30" L Plasma Cutting Table
Product DescriptionALL-IN-ONE HI-END TECHNOLOGY PLASMA CUTTING MACHINE SET: Redefine your metal crafting experience with the Eastwood Versa Cut 4X4 CNC Plasma Table and Plasma Cutting Machine Torch Set. Crafted for those who demand perfection and a user-friendly metal fabrication experience. This all-in-one powerhouse brings a new level of control and versatility to your workshop or home garage. A fusion of precision, efficiency, and cutting-edge technology in one bundle.
USER-FRIENDLY CNC CONTROLLER WITH INTUITIVE LCD DISPLAY INTERFACE: Our dedicated controller simplifies your metal fabrication operation, eliminating the need for external laptop computers. Preloaded with standard shapes and design patterns, This metal plasma cutter tool also accepts custom CNC files through the built-in USB slot offering an intuitive and user-friendly interface for beginners and metal art hobbyist.
SEAMLESS METAL CUTTING PRECISION: Experience unparalleled smoothness in metal cutting with the Eastwood Versa Cut 4X4 CNC Plasma Table. Robust stepper motors ensure long life and accurate cut movements, setting the stage for flawless craftsmanship. With a generous and adjustable height torch travel of 49.2" on the X-Axis and 43.3" on the Y-Axis, every intricate detail is brought to life with precision, making this set a benchmark for seamless and accurate metal fabrication.
EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.
SATISFACTION GUARANTEED: We stand behind our products with confidence. Our commitment to excellence ensures that your product is covered against defects. If you have any questions, please feel free to contact us, and our support team will provide answers within 24 hours.
Product Details| Brand: | Eastwood |
|---|
| Size: | Versa-Cut 4'X4' CNC Plasma Table Set |
|---|
| Color: | Versa-cut 4'x4' Cnc Plasma Table Set |
|---|
| Price: | $4,399.99 |
|---|
Eastwood Versa-Cut 4'X4' CNC Plasma Table With CNC Cut 40A Plasma Cutter Machine with Cutting Torch | All-in-One Professional Dual Voltage Metal Precision Cutting and Sheet Fabrication Equipment Set
Quaintfab - 32" H x 21" W x 30" L Plasma Cutting Table
Product Description𝐌𝐎𝐃𝐄𝐑𝐍 𝐓𝐄𝐂𝐇𝐍𝐎𝐋𝐎𝐆𝐘 𝐂𝐍𝐂 𝐏𝐋𝐀𝐒𝐌𝐀 𝐓𝐀𝐁𝐋𝐄: Craft your unique metal design arts with unparalleled precision with the Eastwood Versa-Cut 2'X2' CNC Plasma Table, a masterful blend of hobbyist accessibility and professional features. Crafted for those who demand perfection and a user-friendly metal fabrication experience. Designed specifically for use with Eastwood Versa-Cut 40 Plasma Cutter (𝐒𝐨𝐥𝐝 𝐒𝐞𝐩𝐚𝐫𝐚𝐭𝐞𝐥𝐲).
𝐔𝐒𝐄𝐑-𝐅𝐑𝐈𝐄𝐍𝐃𝐋𝐘 𝐂𝐍𝐂 𝐂𝐎𝐍𝐓𝐑𝐎𝐋𝐋𝐄𝐑 𝐖𝐈𝐓𝐇 𝐈𝐍𝐓𝐔𝐈𝐓𝐈𝐕𝐄 𝐋𝐂𝐃 𝐃𝐈𝐒𝐏𝐋𝐀𝐘: Our dedicated controller simplifies your metal fabrication operation, eliminating the need for external laptop computers. The 24-in. x 24-in. cut area is great for custom brackets, sign art & making generic shapes. This metal plasma cutting table also accepts custom CNC files through the built-in USB slot offering an intuitive and user-friendly interface for beginners and metal art hobbyists.
𝐒𝐄𝐀𝐌𝐋𝐄𝐒𝐒 𝐌𝐄𝐓𝐀𝐋 𝐂𝐔𝐓𝐓𝐈𝐍𝐆 𝐏𝐑𝐄𝐂𝐈𝐒𝐈𝐎𝐍: Experience unparalleled smoothness in metal cutting with the Eastwood Versa Cut 2X2 CNC Plasma Table. Robust stepper motors ensure long life and accurate cut movements, setting the stage for flawless craftsmanship. With a generous and adjustable height torch travel of 24" on the X-Axis and 24" on the Y-Axis, every intricate detail is brought to life with precision, making this set a benchmark for seamless & accurate metal fabrication.
𝐄𝐀𝐒𝐓𝐖𝐎𝐎𝐃 𝐐𝐔𝐀𝐋𝐈𝐓𝐘: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “𝐃𝐨 𝐓𝐡𝐞 𝐉𝐨𝐛 𝐑𝐢𝐠𝐡𝐭”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.
𝐒𝐀𝐓𝐈𝐒𝐅𝐀𝐂𝐓𝐈𝐎𝐍 𝐆𝐔𝐀𝐑𝐀𝐍𝐓𝐄𝐄𝐃: We stand behind our products with confidence. Eastwood Company offers a 1-year limited warranty and a 90-day return warranty that provides extensive protection for your purchase. Our commitment to excellence ensures that your product is covered against defects. If you have any questions, please feel free to contact us, and our support team will provide answers within 24 hours.
Product Details| Brand: | Eastwood |
|---|
| Model #: | 68254 |
|---|
| Color: | Black |
|---|
| Price: | $2,299.99 |
|---|
Eastwood Versa-Cut 2'X2' CNC Plasma Table for Plasma Cutter Machine and Metal Cutting Torch Machines | Intuitive LCD Touch Screen Display with CNC Controller & USB Port | 10 Gal Waterbed Capacity
