Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt
@ Amazon.com
Product DescriptionSMART SOLAR CHARGE CONTROLLER: Solar charge the smart way with the Victron Energy SmartSolar MPPT charge controller, to ensure that every ray of available sunlight is converted into usable energy, while optimizing battery longevity.
MAXIMIZE POWER OUTPUT: With lightning-fast optimum power point tracking and intelligent charge algorithms the Victron MPPT solar charge controller makes sure you always get the maximum possible power output, even when your solar panels are partially covered in shade.
SYNCHRONIZED CHARGING: Multiple SmartSolar MPPT charge controllers can synchronize to behave as one, simultaneously switching through different charge stages to ensure battery longevity and system wide energy optimization.
CONNECTIVITY: The VictronConnect app lets you connect with your system to gain insight into real-time data and 30-day performance history. Easily configure devices with battery presets, change settings, update firmware and set alarms to tailor your system to your every need.
INTELLIGENT LOAD OUTPUT: Power devices directly and securely from your solar charger. Configure the voltage at which a load should disconnect and rely on the MPPT charge controller to automatically disconnect the loads if the battery voltage drops too low.
Product Details| Brand: | Victron Energy |
|---|
| Model #: | SCC110030210 |
|---|
| Warranty: | 2 year manufacturer |
|---|
| Size: | 5.12 x 7.48 x 2.76" |
|---|
| Color: | Blue |
|---|
| Dimensions: | 5.118110231 X 7.480314953 X 2.755905509 inches (Length X Width X Height) |
|---|
| Price: | |
|---|
Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt
Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt
$27.99
@ Amazon.com (Save 30%)
Product Description【Optimized for 12V Batteries】Compatible with 12V battery banks on the market, including lithium batteries. The LED indicators allow you to set battery types and check the charging staus with ease.
【Smart 4-Stage PWM Charging】Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
【Compact in size】Which makes it easy to install virtually anywhere.
【Multiple battery adaptation】 Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
【Wanderer10A|30A Installation Notes】 The default starting position of the Wanderer controller terminal hatches are closed (in the UP position) that could mistakenly look like an open wire hatch. Make sure to FIRST lower each terminal hatch by screwing the terminals counterclockwise (CCW) to expose the wire terminal hatch to the open position. THEN secure each cable by rotating the screws clockwise (CW) to the closed position.
【Remote Monitoring】 The RS232 communication port allows the Renogy Rover charge controller to communicate with the DC Home app and Renogy ONE M1 via the Renogy BT-1 Bluetooth module (highly recommend to add-on ). This will enable you to monitor the status and productivity of your panels on the go.
Product Details| Brand: | Renogy |
|---|
| Model #: | Charge Controller |
|---|
| Warranty: | 1-year material and workmanship warranty |
|---|
| Size: | 30A PWM Li |
|---|
| Color: | black |
|---|
| Dimensions: | 6.45 X 4.31 X 1.76 inches (Length X Width X Height) |
|---|
| Price: | $27.99 (Save 30%) |
|---|
Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Solar Panel Regulator w/ Temp Sensor Function Fit for Lithium, Sealed, Gel, and Flooded Batteries, Wanderer Li 30A
Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt
Product Description【UPGRADED SOLAR CONTROLLER】This solar charge controller helps you manage the working of solar panels and batteries in solar systems automatically with the build-in industrial microcontroller. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user
【WIDE COMPATIBILITY BY AUTOMATIC ADAPTATION】Compatible with 12V and 24V systems (automatic adaptation, depends on your systems's voltage, no manual adjustments required). A little amplitude voltage deviation is normal. You can also charge your mobile phone, tablet, and PC through the Dual USB output 5V/2.5A (max)
【COMPATIBLE BATTERY TYPE】This solar controller is ONLY suitable for various Lead-acid batteries (including open, sealed, colloid, etc.) Please DO NOT charge to lithium or nickel-metal hydride batteries, etc. Auto-recognizing battery voltage function can protect the battery from misuse and better control the charging process. Note: When installing the controller for the first time, please ensure the battery is fully charged to recognize the battery type correctly
【SAFE TO USE】With Intelligent protection against overcurrent, short-circuit, open-circuit, inverse, low voltage, and overcharge, all of which are automatic recovery types, do not damage the controller. It also has a dual MOS anti-backflow circuit and low heat. This 30A solar charge controller will help you improve the system efficiency and prolong the battery life. But still note to install the controller on a flat, well-ventilated surface
【LCD DISPLAY】Let you know the working status and data with the LCD. The regulator equips load time control and a manual setting function, so you can switch modes and configure parameters conveniently. A good choice for use at home, industrial, commercial, etc. See the instruction manual for specific parameter settings and adjustment methods
【HOW TO CONNECT THE SYSTEM?】When installing, please install the battery first and then connect the solar panel. When disassembling, first remove the solar panel and then the battery. Please connect the devices as the instruction manual shows or the system may be damaged by misuse
Product Details| Brand: | Depvko |
|---|
| Model #: | H0911-2 |
|---|
| Dimensions: | 5.28 X 2.8 X 1.3 inches (Length X Width X Height) |
|---|
| Price: | $11.95 |
|---|
[Upgraded] 30A Solar Charge Controller, 12V/ 24V Solar Panel Regulator with Adjustable LCD Display Dual USB Port Timer Setting PWM Auto Parameter
Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt
Product DescriptionSMART SOLAR CHARGE CONTROLLER: Solar charge the smart way with the Victron Energy SmartSolar MPPT charge controller, to ensure that every ray of available sunlight is converted into usable energy, while optimizing battery longevity.
MAXIMIZE POWER OUTPUT: With lightning-fast optimum power point tracking and intelligent charge algorithms the Victron MPPT solar charge controller makes sure you always get the maximum possible power output, even when your solar panels are partially covered in shade.
SYNCHRONIZED CHARGING: Multiple SmartSolar MPPT charge controllers can synchronize to behave as one, simultaneously switching through different charge stages to ensure battery longevity and system wide energy optimization.
CONNECTIVITY: The VictronConnect app lets you connect with your system to gain insight into real-time data and 30-day performance history. Easily configure devices with battery presets, change settings, update firmware and set alarms to tailor your system to your every need.
INTELLIGENT LOAD OUTPUT: Power devices directly and securely from your solar charger. Configure the voltage at which a load should disconnect and rely on the MPPT charge controller to automatically disconnect the loads if the battery voltage drops too low.
Product Details| Brand: | Victron Energy |
|---|
| Model #: | MPPT 75|15 |
|---|
| Warranty: | Warranty |
|---|
| Size: | 75V 15A |
|---|
| Color: | Green |
|---|
| Dimensions: | 8.267716527 X 5.905511805 X 1.968503935 inches (Length X Width X Height) |
|---|
| Price: | $65.59 |
|---|
Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 75V, 15 amp, 12/24-Volt
Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt
Product Description【Innovative MPPT Design】Die-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98% It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day
【12V/24V Automatically Detect】Automatically detects 12V or 24V DC system voltages (for Non-Lithium battery types), and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes
【Full System Protection】Meant to safeguard your system, the self-diagnostic capability can assess and protect against reverse polarity, battery overcharging, battery over-discharging, overload, short-circuiting, and reverse current
【4-Stage Safely Charging】Features 4-stage charging (Bulk, Absorption, Float, and Equalization) of Lead Acid Batteries and 2-stage charging (Bulk and Absorption) for Lithiuim batteries as well as Lithium Reactivation
【Diverse Load Control】 Connect DC appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller
Product Details| Brand: | Renogy |
|---|
| Model #: | RNG-CTRL-RVR40 |
|---|
| Warranty: | 2-year material warranty |
|---|
| Size: | 40A MPPT |
|---|
| Dimensions: | 6.81 X 9.37 X 2.85 inches (Length X Width X Height) |
|---|
| Price: | $141.00 |
|---|
Renogy Rover 40 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery
Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt
Product Description【UPGRADED 60A MPPT SOLAR CHARGE CONTROLLER】This MPPT solar charge controller compatibility with 12V and 24V systems, Using innovative MPPT technology with high tracking efficiency of up to 99%, which helps you manage the working of solar panels and batteries in solar systems automatically. Compared with regular solar charge controllers, this MPPT controller could increase efficiency by 10%-30%. You don't need to reset it when the battery runs out cause it will memorize various parameters
【SAFE TO USE BY MULTIPLE INTELLIGENT PROTECTION】Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, and a reliable protector for your devices. This 30A solar charge controller has Full 4-stage charge management, which will help you improve the system efficiency and prolong the battery lifespan
【FUNCTIONAL LCD SCREEN EASY TO READ】Intuitive LCD that can indicate the status and data, and display switch modes and parameter configuration. The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial, etc
【PLUG AND PLAY】This charge controller is 12V/24V automatically adapts. Firstly connect the battery, then connect the solar panels. When you first use it, ensure the battery has enough energy, so that the MPPT charge controller can recognize the correct battery type
【TECH SUPPORT & SALES SERVICE】Depvko MPPT Solar charge controller built-in instructions, please refer to the operating instructions to learn how to install and use. And we offer a 12-month guaranty for quality-related issues and technique support. If you have any product quality problems, please feel free to contact us
Product Details| Brand: | Depvko |
|---|
| Price: | $19.98 |
|---|
60A MPPT Solar Charge Controller, 12V/24V Auto Tracking Solar Panel Regulator with LCD Display Dual USB Port Multiple Load Control Modes Timer Setting, Fit for Gel Sealed Flooded and Li Battery(Green)
Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt
$19.99
@ Amazon.com (Save 33%)
Product Description[100% Waterproof] The solar charge controller is built to last in any weather. It has a waterproof seal that keeps it safe from rain, snow, and dust. It’s perfect for outdoor use.
[Strong Safety Protection] This solar controller has six safety features to protect your battery and prevent any accidents. It can prevent reverse current, overheating, short circuit, overcharging, over-voltage, and reverse polarity. You can charge your battery with peace of mind.
[Intteligent LED Display] SOLPERK solar charge controller 12v has two LED lights that show you the charging status. You can easily see if the battery is charging or fully charged.
[Zero Consumption from Battery] This solar panel controller uses solar power to charge your battery, and it doesn’t drain your battery at night. It has zero power consumption when there is no sunlight.
[Compatibility] This solar panel charge controller is designed for 12V solar panels with a maximum current of 8A, and 12V rechargeable batteries. It works with 12V batteries such as LiFePO₄, AGM, GEL, and more.
[Easy to Use] This controller has a handy SAE connector that plugs in easily. Just make sure to connect the red wire to the positive terminal and the black wire to the negative terminal of your battery and solar panel.
Product Details| Brand: | SOLPERK |
|---|
| Model #: | 001 |
|---|
| Color: | Black |
|---|
| Price: | $19.99 (Save 33%) |
|---|
SOLPERK 8A 12V Solar Charge Controller with LED Display, IP67 Waterproof PWM Intelligent Solar Panel Battery Regulator for Gel AGM Lead-Acid Lithium LiFePO4 Battery, Used in RV Boat Car
Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt
Product Description【60A MPPT CHARGING CONTROLLER】 4-stage battery charging algorithm for a rapid, efficient , safe charging(Bulk Charge, Boost Charge, Float Charge,and Equalization), 60amp Rate Charging current.
【Controller WIDE RANGE SOLAR VOLTAGE/POWER SUPPORT】Controller support High PV Input Power/voltage. Controller can accept Solar voltage up to 190V. When battery is 12V system: Suggest Solar power 720W, suggest range:DC20V~DC80V；1440W 105V when 24V; 2100W 150 when 36V; 2800W 150v when 48V.
【12V/24V/36V/48V BATTERY SUPPORT】Negative grounding design controller more safe, controller Compatible with a variety of batteries(lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customize charging parameter according your need.
【0 layer MPPT charge controller】Easy to know Charging process in one glance.
【FULL CHARGING PROTECTIONS】Short Circuit/Overcurrent/Reverse Polarity,etc.protections; Very detail LCD screen and 4 buttons make this solar controller very simple to use. And detail troubleshooting list, Fast service support and Simple and detail wiring instruction avaiable.
Product Details| Brand: | PowMr |
|---|
| Model #: | NEW MPPT 60A Controller |
|---|
| Size: | 60amp/12V24V36V48VAUTO |
|---|
| Color: | New-Orange |
|---|
| Dimensions: | 6.5 X 2.8 X 9.1 inches (Length X Width X Height) |
|---|
| Price: | $99.39 |
|---|
PowMr 60AMP MPPT Charg Controller, Fit for 12V 24V 36V 48V Lead-Acid Lithium Battery, MAX 160V 2880W Input Solar Charge Controller
Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt
Product Description“Product performance” This product adopts a 32-bit high-speed main control chip, LED screen display, complete multi-stage PWM charging management, built-in reverse protection, open circuit protection, high temperature protection, short circuit protection, all of which are automatic recovery type, do not damage the controller, and have dual MOS anti backflow circuit
“Dual voltage compatibility” Compatible with 12V and 24V systems. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/1A (max)
“Automatic recognition system”Controllable systems and automatic recognition systems；This controller can automatically recognize battery voltage, help you better control battery charging, extend battery life, and has load time control function, manual setting, and automatic recognition
“Adjustable Display Screen” LCD screen can view various parameters and real-time understand data dynamics
“Important installation sequence” When installing, first install the battery and then connect the solar panel. When disassembling, first remove the solar panel and then the battery. This is something that must be noted
Product Details| Brand: | FLYING LION |
|---|
| Model #: | FYKZQ001 |
|---|
| Dimensions: | 5.24 X 1.18 X 2.76 inches (Length X Width X Height) |
|---|
| Price: | $9.99 |
|---|
FLYING LION 30A12V/24V Solar Charge Controller PWM Solar Panel Regulator with Adjustable LCD Display Dual USB Port Timer Setting PWM Auto Parameter
Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt
$49.99
@ Amazon.com (Save 29%)
Product Description【12V/24V Automatically Detect】Automatically detects 12V or 24V DC system voltages (for non-lithium batteries). The LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
【Smart 4-Stage PWM Charging】Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
【Flush Mount Design】Designed to cleanly flush mount on walls, providing a sleek, integrated look. An included Surface Mount Attachment allows for versatility in mounting.
【Negative Ground】The Adventurer is a negative ground controller. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Any negative connection on the solar module, battery and load can be safely earth grounded as required.
【Multiple Battery Adaptation】 Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
【Real-time Monitoring】The RS232 port can work with the BT-1 Bluetooth module to deliver real-time energy data across the DC Home smart phone app & Renogy ONE M1
Product Details| Brand: | Renogy |
|---|
| Model #: | Adventurer 30A Li 12V/24V |
|---|
| Warranty: | NEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller. |
|---|
| Size: | Lithium Battery Compatibility |
|---|
| Color: | black |
|---|
| Dimensions: | 6.56 X 4.5 X 1.9 inches (Length X Width X Height) |
|---|
| Price: | $49.99 (Save 29%) |
|---|
Renogy 30A 12V/24V PWM Solar Charge Controller with LCD Display Flush Mount Design Negative Ground, Compatible with Sealed, Gel, Flooded and Lithium Batteries, Adventurer 30A,black
