FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder

FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder (No Gas Needed)

$189.99 @ Amazon.com (Save 46%)

[EASY TO USE] - The 140 FC-I machine uses 0.030 in flux-core wire, and has infinite voltage and wire feed speed control so you can dial in the perfect weld every time. This is the ideal entry-level welder.

[POWERFUL & PORTABLE] - This welder features a 140 AMP output that allows you to weld up to 1/4 in of mild steel. The 140 FC-I can handle both 2 and 10 pound rolls of wire. Weighing in at only 19 pounds, this machine can be easily carried to an DIY project.

[WELDER INCLUDES] - 8 foot MIG gun, 8 foot ground clamp, and 20amp - 15amp adapter.

[FORNEY BRAND STORE] - Visit Forney's Amazon brand store to find recommended accessories and consumables.

FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder (No Gas Needed)

FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder (No Gas Needed)

$16.09 @ Amazon.com

All position flux core MIG wire for mild steel that is a self Shielded and works well on rusty, dirty and painted Material

Best suited to single pass applications with high travel speed, runs hotter than solid wires

Excellent for outdoor windy conditions

Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!

Forney 42300 Flux Core Mig Wire, Mild Steel E71TGS.030-Diameter, 2-Pound Spool, Silver, Pack of 1

FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder (No Gas Needed)

$15.99 @ Amazon.com (Save 30%)

E71T-GS FLUX CORE WIRE: Gasless flux cored welding wire AWS E71T-GS, in possession of smooth arc action, high feedability, easy to weld.

EXCELLENT PERFORMANCE: Low spatter, full slag coverage, easy slag removal, porosity free, good bead appearance.

APPLICATIONS: Excellent for outdoor windy conditions. Shielding gas is not required, all position welding, single and multi pass welding.

STRONG SPOOL: Use new ABS plastic material plate, which is durable,tough and anti-fragile.It not only can prevent the damage during the transportation but also works fluently inside the machine.

SPECIFICATIONS: Weight: 2lbs/Diameter: .030''(0.8mm)

YESWELDER Flux Core Gasless Mig Wire, Mild Steel E71TGS .030-Diameter, 2-Pound Strong ABS Plastic Spool

FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder (No Gas Needed)

$29.99 @ Amazon.com

Enhanced Arc Stability: With an internal flux core, ARCCAPTAIN E308LFC-O Flux Cored Stainless Steel Welding Wire stabilizes the arc, enhancing operational performance and providing a protective barrier.

Consistent Performance: Suitable for welding in all positions, this Stainless Steel Welding Wire minimizes spatter and delivers excellent weld formation, ensuring reliable results.

Versatile Application: ARCCAPTAIN Stainless Steel Flux Core Welding Wire is compatible with various stainless steel grades including 304, 304L, 308, 308L, 321, and 347, eliminating the need for gas and enhancing welding efficiency.

Wide Compatibility: Designed for MIG welding machines, this stainless steel gasless flux cored wire is compatible with a range of welders including HF Welder, Forney Welder, and Lincoln Welder, catering to both professional and beginner welders.

Premium Packaging: Each 2-pound spool of ARCCAPTAIN stainless steel welding wire is meticulously vacuum packed, ensuring waterproof and moisture-proof protection, guaranteeing optimal MIG weld wire performance for welders.

ARCCAPTAIN Stainless Steel Flux Cored Wire E308LFC-O .030-Diameter MIG Welding Wire Stainless Steel Wire with Low Splatter Compatible With Lincoln Miller Forney Harbor MIG Welder 2-Pound

FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder (No Gas Needed)

$16.99 @ Amazon.com

Welding Easy and Quick: AWS E71T-GS 030” Flux Core welding wire (The actual Net Weight of Wire is 2LB), no need for shielding gas, install it then you can welding all positions, single and multi pass welding. Great for T-joints, butt welds & lap welds.

Great Welding Performance: Smooth arc action and High feedability, you will love the less splatter when do your welding project. The flux filling acts as a shielding agent to create beautiful and clean welds. Perfect for Professional welder, metalworking hobbyist, or DIY enthusiast.

Self shielded gasless mig welding wire works well on rusty, dirty and painted Material, also strong resistant to base material oil pollution, perfect for use outdoors, high-altitude, and other different environments.

Professional Packing: Flux core welding wire is vacuum packed for waterproof, moistureproof, dustproof, then ensure optimum welding performance and effect.

Trusted Quality and Service: The mig welder wire was passed TÜV TEST, which made of the finest quality materials and using state of the art technology from a twenty year factory offering in the welding MIG accessories that conform to the high standards.

ARCCAPTAIN Flux Core Welding Wire .030, E71T-GS Mig Welding Wire 2-Pound Spool Gasless Mild Carbon Steel Compatible With Lincoln Miller Forney Harbor Welder

FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder (No Gas Needed)

$20.16 ($0.63 / Ounce) @ Amazon.com (Save 19%)

All position flux core MIG wire for mild steel that is a self Shielded and works well on rusty, dirty and painted Material

Forney 42302 Flux Core Mig Wire , Red

FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder (No Gas Needed)

$23.99 @ Amazon.com (Save 29%)

Particularly On Thin-gauge Mild Or Galvanized Steel

Great In Single- Or Multi-pass Welds

Typically Used For Light Structural, Machinery Part Fabrication, Prefab Construction, Railroad Car Repair, Short Assembly Welds, Tanks And General Fabrication

2-pound Spool

Hobart H222106-R19 2-Pound E71T-11 Carbon-Steel Flux-Cored Welding Wire, 0.030-Inch

FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder (No Gas Needed)

$23.99 @ Amazon.com (Save 10%)

Robust Welding Performance: The 0.035" diameter wire is optimized for stronger and more substantial welding tasks, providing reliable and durable welds for various applications.

Broad Material Suitability: This wire is effective for welding mild steel, galvanized steel, and stainless steel, offering versatility for diverse welding needs, with a caution that stainless steel welds may rust over time.

Ideal for Outdoor and Windy Conditions: The flux core design of the wire makes it suitable for outdoor and windy environments, eliminating the need for shielding gas.

Enhanced Spool Durability for Long-Term Use: The high-strength white ABS spools in this pack reduce the risk of damage and ensure longevity, making the wire reliable for both storage and use.

Ample Wire Supply for Extensive Projects: With two 2-pound spools, this package provides ample wire for larger or multiple projects, ensuring continuous welding without frequent replacements.

WelderElite 2-Pack 0.035" Gasless Flux Core MIG Wire, 2lb Each, E71T-GS, Perfect for Welding Galvanized, Stainless & Mild Steel Projects

FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder (No Gas Needed)

$66.99 ($0.42 / Ounce) @ Amazon.com (Save 16%)

Country Of Origin: United States

Model Number: H222108-R22

Item Package Dimension: 8.25" L x 8.25" W x 2.75" H

Item Package Weight: 11.080004 lb

Hobart H222108-R22 10-Pound E71T-11 Carbon-Steel Flux-Cored Welding Wire, 0.035-Inch

FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed Welder (No Gas Needed)

$23.99 @ Amazon.com (Save 11%)

[High-Efficiency Gasless Welding]: WelderElite E71T-GS 0.030'' welding wire is specifically designed for gasless welding, applicable to all positions. It facilitates single or multiple pass welding without the need for shielding gas, ready for use right out of the box, enhancing welding efficiency.

[Superior Welding Experience]: Made with high-quality materials and precision technology, ensuring a stable arc with minimal spatter and smooth feeding. It produces neat, pore-free welds, significantly reducing post-welding clean-up efforts.

[Adaptable to Diverse Materials]: Our welding wire is versatile enough to weld on galvanized steel, stainless steel, and mild steel surfaces. While it's capable of welding stainless steel, it's important to note that the weld seam may rust over time. For optimal results, preparing surfaces by grinding off rust, oil, or coatings is recommended, making it suitable for a wide range of environments, both indoors and outdoors.

[Double Pack, Multipurpose Use]: Each package contains 2 pounds of welding wire, totaling 4 pounds, offering more choices and flexibility. Suitable for a variety of welding projects, both for professional welders and DIY enthusiasts, catering to diverse needs.

[Quality Assurance, Broadly Applicable]: Strictly manufactured according to industry standards, ensuring the quality of each spool of welding wire. Compatible with various MIG welding machines, meeting a wide range of welding demands from professional tasks to home repairs.

WelderElite 2-Pack 0.030" Gasless Flux Core Wire, 2lb Each, Perfect for MIG Welding Galvanized, Stainless & Mild Steel Projects, E71T-GS