Hobart Handler 125 offers impressive output range from 25A to 130A. So it is capable to weld up to 1/8-inch steel with flux-cored wire. It has factory-installed gas solenoid that makes it easy to change from flux-cored wire to MIG welding. The portable welder also comes with integrated contactor for the ease of use and safety. Consequently, it makes wire electrically very cold until gun-trigger is pulled.
Impressively, Hobart Handler 125 welder comes with 4 x output voltage settings. So it is capable to provide a broad operating window for each wire with quick and easy adjustment for different thickness and joints.
Included components
The portable Hobart welder comes with an 8-ft H100F2-8 gun with liner to handle .030-.035 inch diameter wires.
A power cord with a built-in plug
Contact tips
The owner manual comes with all the guidelines to operate this machine successfully.
A chart for setting-up the weld
The Hobart wire-feed welder comes with all the components, which provide great convenience for the welding. You can see the above-mentioned list of components. The list contains a wire cable, an owner manual and an 8-ft gun.
Pros
This is a good welder for the price. It can weld thicker material.
The welder delivers good welding performance.
Hobart Handler 125 welder allows easy selection of speed of the wire and metal thickness.
It can handle up to 1/8-inch material thickness.
Four output voltage settings for the wider welding flexibility
Cons
The provided ground clamp is of low quality. It is suggested to buy a better quality ground clamp.
Not consistent with the plastic wire feed system
The Manufacturer
Hobart has decades of experience in producing industrial machines. It has been on the market since 1917. The company is not only dedicated to manufacturing, but also designing and testing a wide range of welding and cutting products. All the products from Hobart are with industrial standards.
The Hobart products are very popular in many industries such as farming, maintenance, repair, workshop, DIY and many other metal related works. Buying a Hobart product means buying a quality product at the best price.
Recently, Hobart introduced many new products such as welding accessories, welding helmets, rod and wire, hardware and many other tools. Which means you can be able to buy anything you want for industrial use.
FAQ
Is Hobart Handler 125 gas or gasless welder?
Answer: this unit can be used with or without shielding gas.
Is it 110V or 220V welder?
Answer: the Hobart Handler 125 runs on 110V normal input power.
Can the unit use #10 spool of wire?
Answer: yes, the spool hub assembly works with 4-inch or 8-inch spools so it can use #10 spool of wire.
What is the main difference between 100 and 125 Hobart Handler models?
Answer: the 125 model is larger than 100 model. The Hobart Handler 125 is capable to do solid wire with gas as well as flux core gasless wire. The100 model can only use flux core gasless wire.
Conclusion
The Hobart Handler 125 welder has scored high on the users’ reviews. It is good for the price you pay. The unit covers the output range from 25 to 130 AMP, which is good for wider welding applications.
This machine has received impressive reviews from the existing customers so it is recommendable here to buy. For the peace of mind, please read reviews on Amazon and other shopping websites. You will be able to find most of the reviews in the favor of this unit.
The portable Hobart welder is built durably. Therefore, it is a solid machine from both outside and inside. It comes with four output voltage settings for the broader operating scope. It can handle material thickness up to 1/8-inch steel with flux-cored wire.
WelderReview.com reviews a wide range of welding machines and other related tools such as welding helmets, carts, clamps, gloves, kits, hoods, masks, rods, wires and other welding accessories from leading brands such as Millar, Lincoln, Hobart and others.
Ideal replacement for Hobart H-10 (195957), H100S2-10(245924).
Usually H-10 Hobart MIG gun can be found on Hobart Handler 130XL, 135, 140, 175, 187, AutoArc XLT142 and XLT182 direct-connect cable.
Use Miller M-series MIG Gun consumables. Ready to feed .030-.035 diameter welding wire. With standard Miller type front and rear end (see all listed pictures for details).
Powerful and Professional Results. Operates on 230V power
25 to 190 output amperage
7 voltage selections, enhanced magnetics and infinite wire feed speed control offers easier fine control of the output parameters for improved arc performance with less spatter
Direct replacement for Hobart Mig Welder 15ft 100 Amp,Replace Part # Hobart H-10/195957 H100S2-10/245924
Fitment:The mig welding gun for Hobart welders H-10 as following models: Hobart 130XL/135/140/175/187/ AutoArc XLT142 & XLT182
Uses same standard Hobart consumables: .030"(000067) .035"(000068) mig welding tips, 169-715 gas nozzle,169-716 gas diffuser
Ehance welding performance:Our Hobart H-10 mig welding gun replacement is made of pure copper cable that improve conductivity& durability,ensuring a reliable and efficient welding performance.
Save Effort Welder:The mig welding gun torch is ergonomics handle design for save effort and superior welding experience.
Smooth Welding Performance: Designed to handle 0.023-inch, 0.030-inch and 0.035-inch wires, our spool gun ensures stable arcs, minimal splatter, and high-precision welds. It is compatible with flux-cored wires, solid wires, and aluminum wires, making it ideal for various materials in automotive, marine, and construction projects.
Compatibility: Compatible with Hobart Handler 210 MVP mig welder and supports 1 lb welding wire spools, offering versatility for various welding tasks.
Visual Wire Feeding System: The spool gun features a transparent wire feeding mechanism, allowing users to monitor wire feeding in real-time, ensuring smooth operation and reducing the risk of jams or bird-nesting for uninterrupted welding.
Lightweight & Ergonomic Design: Weighing only 4.9 lbs, with an ergonomic grip for comfortable handling, it reduces fatigue during long welding sessions, suitable for both professionals and DIY enthusiasts.
Durable Build for Long-Lasting Use: Equipped with a high quality 10-foot cable, it provides durability and reliable performance and excellent reach for large-scale projects even in demanding environments.
Product Details
Brand:
VEVOR
Model #:
XLHBTSR100
Size:
100A 10ft
Dimensions:
16.929133841 X 16.929133841 X 12.598425184 Inches (Length X Width X Height)
Price:
$128.99
VEVOR 100Amp Spool Gun with 10FT Cable, Compatible with Hobart Handler 210 MVP Mig Welders, Suitable for 0.023", 0.030" and 0.035" Flux Core/Solid/Aluminum Welding Wires
