Hyperikon Plasma Cutter, 3 in 1 TIG Welder, IGBT Inverter, 120V 240V Dual Voltage

bestarc Plasma Cutter, BTC800DP 9th Generation 80Amps Pilot Arc Plasma Cutter Machine, Digital Screen Display Dual Voltage 110/220V Plasma Cutting Machine (BTC800DP 9GEN 110/220V)

$549.99 @ Amazon.com

[Pilot Arc Function]: BTC800DP 9th bestarc plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. The cutting methods of mesh and plate are added to solve the problem that cutting mesh is easy to break arc.

[Digital Screen Display]: The screen of the plasma cutter machine displays the parameters centrally such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.

[Sensor of Air Pressure & Air Compressor]: Inside of plasma cutting machine have sensor of air pressure, User can adjust the air pressure through the regulator. The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT, which can be used after opening the box. Users can use it after connecting to the air compressor. Recommended air compressor air pressure value be within the range of 90PSI, 250L/min.

[Cutting Thickness]: Pilot arc plasma cutter adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-40A, Under 220V current display is 15-80A, the maximum cutting thickness is recommended to be 14mm @ 40A 110V, 50PSI; 25mm@80A 220V, 60 PSI.

[PT/2T/4T/PA Function]: Post time function, with an adjustment range of 3-15 seconds. Adjust the cooling time of the torch head to extend the service life of consumables. Generally speaking, we recommend a cooling time of 4-8 seconds. 2T/4T automatic cutting release your finger. 2T is semi-automatic cutting control, and 4T is automatic cutting control. PA adjust the time for the pilot arc, longer seconds good at cutting mesh metal, short seconds is good to extend the life of consumables.

bestarc Plasma Cutter, BTC800DP 9th Generation 80Amps Pilot Arc Plasma Cutter Machine, Digital Screen Display Dual Voltage 110/220V Plasma Cutting Machine (BTC800DP 9GEN 110/220V)

bestarc Plasma Cutter, Pilot Arc BTC500DP 2nd Generation 50Amps Dual Voltage 110/220V Plasma Cutting Machine (BTC500DP 110/220)

$183.98 @ Amazon.com (Save 23%)

[Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.

[Dual-Voltage 110/220V]: Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.

[Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel，you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.

[Post Time Function]: BTC500DP with post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.

[Cutting Thickness]: BTC500DP is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.

bestarc Plasma Cutter, Pilot Arc BTC500DP 2nd Generation 50Amps Dual Voltage 110/220V Plasma Cutting Machine (BTC500DP 110/220)

YESWELDER Plasma Cutting Machine 65Amp Non-High Frequency Non-Touch Arc Digital Screen Display DC Inverter 110/220V Dual Voltage Blowback Plasma Cutting Machine CUT-65DS

$319.99 @ Amazon.com (Save 29%)

[NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.

[Digital Screen Display]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.

[Powerful Cleaning Cutting] CUT-65DS adopts the international leading MCU intelligent digital control technology, all the main components are realized by software. Ideal Clean Cut: 5/16"@110V, 5/8"@220V Maximum Cut: 1/2"@110V, 63/64"@220V.

[PT/2T/4T Function]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.

[AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.

[NON-TOUCH PILOT ARC] The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.

YESWELDER Plasma Cutting Machine 65Amp Non-High Frequency Non-Touch Arc Digital Screen Display DC Inverter 110/220V Dual Voltage Blowback Plasma Cutting Machine CUT-65DS

YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Screen Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Cutting Machine CUT-55DS Pro

$179.99 @ Amazon.com (Save 10%)

[NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.

[DIGITAL DISPLAY]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.

[CLEAN CUT] CUT-55DS PRO adopts the international leading MCU intelligent digital control technology, all the main components are realized by software.CLEAN CUT: 1/3''@110V 1/2''@220V // MAX CUT: 1/2''@110V 4/5''@220V.

[PT/2T/4T FUNCTION]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.

[AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.

[NON-TOUCH PILOT ARC] The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.

YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Screen Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Cutting Machine CUT-55DS Pro

CUT50A Inverter Non touch HF Plasma Cutter 110 Voltage 45Amp 1/4 inch Clean Cut 1/2 inch Limit Cut SG55 torch high duty cycle light and small

$85.99 @ Amazon.com

✪ Plasma Cutter, Input voltage is 110/220V, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum, It is High Frequency Arc Starting. we offer 1 year warranty for this machine.

✪ Cutting current 40Amps DC output, 8mm clean cut, 12mm max severance cutting thickness under 220V 65PSI, This machine very good for home use to cut thin metal, car steel, Come with PT31, work with standard parts, the buyer easy to find the consumables from market.

✪ Input voltage is 110/220V 50/60Hz,It is dual voltage, Automatic indicate the voltage no need to switch by handle from 110v to 220v, Better use 45Amps power breaker for this machine. Machine come with NPT 1/4’’ air connector, very quick to connect machine to air compressor.

✪ Under 110V 30Amps output, Duty cycle 60% in 30Amps, 100% in 25Amps,Under 220V 40Amps output, Duty cycle 60% in 40Amps,100% in 30Amps, Air pressure range from 40-70PSI, Maybe the cutting arc not stable if the air less or over the range.

✪ There are 110v and 220v LED indicator on penal, Very easy to know what kind of voltage come into machine. We supply high quality machine, very lightweight but powerful, Very easy to operate and carry, We also supply quality accessories and torch parts.

CUT50A Inverter Non touch HF Plasma Cutter 110 Voltage 45Amp 1/4 inch Clean Cut 1/2 inch Limit Cut SG55 torch high duty cycle light and small

DURATECH Plasma Cutter, 40Amp Non-Touch Pilot Arc Plasma Cutting Machine with 120V/240V Dual Voltage IGBT Inverter, Digital Display and 50A to 15A Plug Adapter, Plasma Cutting Equipment 1/2" Clean Cut

$199.99 @ Amazon.com (Save 13%)

【NON-TOUCH PLASMA CUTTER】This plasma cutter can effectively cut rough, painted, rusted metal with less slag. Pilot arc technology allows you to cut without touching the tip to the metal for better cutting quality and a longer consumable life

【POWERFUL CLEAN CUT】Automatic dual voltage 120V and 240V for the wide use of light-duty work and heavy-duty construction site work. 1/2" clean cut thickness and 11/16" maximum severance cut thickness under 240V

【LIGHTWEIGHT AND PORTABLE】This compact plasma cutter is 14-3/8" L * 8-5/8" W * 6" H and weighs 14.4 lbs, making it easy to use in different environments. Lightweight for both men and women. Beautiful design, ideal gifts!

【WIDE CUTTING ABILITY】This 40 amp professional plasma cutter is suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, copper, titanium, and other metal materials. It is very friendly to both DIY, beginner cutter, and professional workers

【ADDED SAFETY】This non-touch pilot arc plasma cutter is certificated by CSA and the power cord is UL listed, automatic compensation for voltage fluctuation, over-current protection, overload protection, and temperature control. Please try with confidence. Any problems, please feel free to get in touch with us

DURATECH Plasma Cutter, 40Amp Non-Touch Pilot Arc Plasma Cutting Machine with 120V/240V Dual Voltage IGBT Inverter, Digital Display and 50A to 15A Plug Adapter, Plasma Cutting Equipment 1/2" Clean Cut

FLARING FC650DL Plasma Cutter, 65 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V with Consumable Set Digital Display

$229.99 @ Amazon.com

【65A NON-TOUCH PILOT ARC PLASMA CUTTER】Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.

【POWERFUL CUTTING PERFORMANCE】Automatic dual-voltage 120/240V. With advanced IGBT inverter technology, 10-60A DC output, 5/8” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.

【VOLTAGE TRANSFER】 The power cord plug installed on the machine is a 110V US standard plug. A conversion cord is included to easily convert 110V to 220V or 120V to 240V for use in your home, shop, or factory. 30A circuit breakers are recommended for 220V and 60A circuit breakers are recommended for 110V.

【PACKAGE INCLUDES】 FC650DL plasma cutter machine, upgrade plasma cutting torch AG60, ground clamp, air filter regulator, air hose, consumables, instruction manual etc.

【WARRANTY TRUSTED FROMR FLARING】FLARING offer a 30 day money-back guarantee and 1-year new replacement warranty covered by our US based lifetime technical support. To avail the warranty, please contact online to activate the warranty when you receive the goods.

【PORTABLE AND EASY TO USE】This plasma cutter machine only weighs 9 pounds, easy to carry. The pre-installed quick air coupling, only takes 30 seconds and you can start cutting. Significantly save your preparation time.

FLARING FC650DL Plasma Cutter, 65 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V with Consumable Set Digital Display

MYYWELD Pilot Arc Plasma Cutter – CUT50 Non-Touch Pilot Arc Plasma Cutting Machine, 110V High Frequency Inverter 18mm Max Cutting Thickness

$179.99 @ Amazon.com

【Non-contact Pilot Arc】 Strong flame, smooth cutting, torch starts arc without touching the metal plate. Effectively cuts rough, painted and rusted surfaces with minimal slag generation.

【Plasma Cutting】Plasma cutting can penetrate all types of conductive metals including mild steel, alloys, aluminum and stainless steel with better cut quality. Efficiency: 80%; Maximum cutting thickness 18mm.

【Overload Protection】Adopting imported IGBT and high efficiency cooling fan to ensure the service life and maximize the performance. Protection mechanism will be turned on in case of overload, once the internal temperature drops to a safe level, the machine can be used again.

【Powerful & Portable】Ingenious design and exquisite machine body bring you a new welding experience. The small size of the cutting machine does not detract from the fact that it delivers excellent cutting results.It cuts smoothly like a hot knife on butter, suitable for both beginners and experienced.

【Wide applications】The plasma cutter can cut most metals and is widely used in automotive, plumbing systems, repair/maintenance, metal fabrication, manufacturing and more.

MYYWELD Pilot Arc Plasma Cutter – CUT50 Non-Touch Pilot Arc Plasma Cutting Machine, 110V High Frequency Inverter 18mm Max Cutting Thickness

AIXZGLOBAL 45 Amp Plasma Cutter, Non-HF Non-Touch Pilot Arc 110/220V Plasma Cutting Machine with Digital Display IGBT Inverter 16mm Max Cut

$209.99 @ Amazon.com

✅【NON-TOUCH PILOT ARC】: The AIXZGLOBAL plasma cutter features a low-frequency non-touch arc starting mode. The torch head effectively cuts rough, rusty surfaces without touching the metal and produces minimal slag, improving cut quality and extending consumable life.

✅【LOW-FREQUENCY START】: AIC45 plasma cutter machine is equipped with an XT45 low-frequency cutting gun, which makes it easier to start the arc, has a higher cutting success rate, has no interference with the power supply and is harmless to human health.

✅【CUTTING TECHNOLOGY】: The plasma cutter ideals cut cleanliness of 10mm, maximum 16mm severance thickness, cut stainless steel, carbon steel, aluminum, copper, titanium and other metal materials with fast cutting speeds and smooth cutting surfaces.

✅【IGBT & 2T/4T】: This dual voltage plasma cutting equipment adopts stable and mature IGBT inverter technology. DC output current 15-45A, 50/60HZ, duty cycle 60%, LCD digital display can easily control the voltage and current, and you can select the 2T/4T mode through the display to meet your needs and choices.

✅【LIGHTWEUGHT & APPLICABLE】: Our upgraded plasma cutter is compact, shaped and lightweight with an easy carry handle. Weight 11.2LBS. Dimensions: 28x12x25cm It is suitable for home DIY hobby, repair work, metal processing, site work, etc.

✅【BUY WITH CONFIDENCE】: 1 X Power Cable, 1 X Plasma Cutting Torch(3M), 1 X Ground Clamp(1.5M), 1 X Air Hose(3M), 1 X Air Filter Regulator, 1 X Manual. AIXZGLOBAL provides 30-Day Money Back Guarantee and 2-Years Warranty, If there are any questions, please feel free to contact us. Notice: Our products have been professionally tested at the factory.

AIXZGLOBAL 45 Amp Plasma Cutter, Non-HF Non-Touch Pilot Arc 110/220V Plasma Cutting Machine with Digital Display IGBT Inverter 16mm Max Cut

Reboot 2PCS PT-31 Plasma Cutter Roller Guide Wheel Spacer Circle Compass Stand Off Fit For Touch Arc Plasma Cutter Torch CUT35 CUT40 CUT45 CUT60 CUT50D LGK40 LG40 (not fit ag60 torch）

$9.99 @ Amazon.com

【PT31 TWO WHEELS SPACER ROLLER GUIDE】The double wheel roller guide can fit PT-31 torch / LG-40 torch, which can work CUT-35,CUT-40,CUT-50D, CUT-60D LGK-40 plasma cutter machine.

【FIT FOR DIFFERENT TYPES OF PT31 TORCH】The positioning screws on the Roller guide can be adjusted to follow and fix different types of PT31 plasma cutting torch.Inner diameter adjustment from 21mm/0.83in to 25mm/0.98in.

【WHEEL HEIGHT CAN BE ADJUSTED】The two wheels of the Roller guide can be adjusted in height, from 45mm/1.77in to 53mm/2.08in.

【PACKAGE INCLUDES】2 pcs PT-31 Roller Guide Assembly.No need to assemble.

【UPGRADED AND THICKEDED】The screw slot does not shift, the roller is smooth and sleek, easy to control the cutting speed.

Reboot 2PCS PT-31 Plasma Cutter Roller Guide Wheel Spacer Circle Compass Stand Off Fit For Touch Arc Plasma Cutter Torch CUT35 CUT40 CUT45 CUT60 CUT50D LGK40 LG40 (not fit ag60 torch）