Hyperikon Plasma Cutter, 3 in 1 TIG Welder, IGBT Inverter, 120V 240V Dual Voltage

ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY

$249.99 @ Amazon.com

【EASY TO CUT, POWERFUL PERFORMANCE】Automatic dual-voltage 110/220V. With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. The recommended current is 50A, the recommended psi is between 20-40psi when connecting 110V, the recommended psi is between 30-60psi when connecting 220V.

【EASY TO ASSEMBLE】With a plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. Only takes 30 seconds and you can start cutting.

【PORTABLE & LIGHTWEIGHT】This plasma cutter machine only weighs 13 pounds, easy to carry. It's also tiny and light enough to move with strap in any workplace(strap included).

【ADVANCED DIGITAL TECHNOLOGY】You can adjust the post-flow time from 5-15 seconds to have a clean cut. Also could select 2T/4T to have a comfortable working experience. The exclusive Large LED design provides you with an accurate data display and helps you read all data easier and more clearly without taking off your helmet.

【SAFETY & DURABLE】 ARCCAPTAIN welder machine have passed a variety of professional tests and certifications including TÜV and ANSI standards before leaving our factory.

ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY

YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Large LED Digital Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Plasma Cutting Machine CUT-55DS PRO NEW

$219.99 @ Amazon.com

[NON-HF] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.

[DIGITAL DISPLAY] The latest digital display screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to view the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. There will be an error code system on the screen if there is a problem with the machine.

[POWERFUL CUT] CUT-55DS PRO adopts the international leading MCU intelligent digital control technology, all the main components are realized by software. CLEAN CUT: 1/3''@110V 1/2''@220V // MAX CUT: 1/2''@110V 4/5''@220V.

[PT/2T/4T FUNCTION] Post time/post flow function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.

[NON-TOUCH PILOT ARC] The IPT40 plasma cutting torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.

[AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.

YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Large LED Digital Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Plasma Cutting Machine CUT-55DS PRO NEW

bestarc Plasma Cutter, Pilot Arc BTC500DP 2nd Generation 50Amps Dual Voltage 110/220V Plasma Cutting Machine (BTC500DP 110/220)

$181.69 @ Amazon.com (Save 24%)

[Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.

[Dual-Voltage 110/220V]: Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.

[Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel，you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.

[Post Time Function]: BTC500DP with post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.

[Cutting Thickness]: BTC500DP is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.

bestarc Plasma Cutter, Pilot Arc BTC500DP 2nd Generation 50Amps Dual Voltage 110/220V Plasma Cutting Machine (BTC500DP 110/220)

FLARING Pilot Arc Plasma Cutter,65 Amp Non-Touch Plasma Cutter Machine 120V/240V Dual Voltage Plasma Cutters,1/2"(12.7mm) Clean Cut 4/5"(20mm) Severance Cut with Consumable Set Update 5th FC650DL

$199.99 @ Amazon.com

✔️【★65A NON-TOUCH PILOT ARC PLASMA CUTTER 5GEN★】FLARING pilot arc plasma cutter effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.

✔️【★EASY TO CUT★】Automatic dual-voltage 120/240V. FLARING pilot arc plasma cutter with advanced IGBT inverter technology, 10-60A DC output, 1/2” ideal clean cut and 4/5” maximum severance cut under 220/240V. 10-35A DC output, 2/5" ideal clean cut and 3/5" maximum severance cut under 110/220V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.

✔️【★VOLTAGE TRANSFER★】FLARING Pilot arc plasma cutter machine is a 110V US standard plug. A conversion cord is included to easily convert 110V to 220V or 120V to 240V for use in your home, shop, or factory. 30A circuit breakers are recommended for 240V and 60A circuit breakers are recommended for 120V.

✔️【★PORTABLE AND EASY TO USE★】This non touch pilot arc plasma cutter machine only weighs 8.4 pounds, easy to carry. The pre-installed quick air coupling, only takes 30 seconds and you can start cutting. Significantly save your preparation time.

✔️【★PACKAGE INCLUDES★】FLARING plasma 65 amps cutter machine FC650DL 5GEN, with upgrade plasma cutting torch AG60, ground clamp, air filter regulator, air hose, consumables, instruction manual etc.

✔️【★BUY WITH CONFIDENCE★】FLARING offers a 30 day money-back guarantee and 1-year warranty covered by our US based lifetime technical support. To avail the warranty, please contact online to activate the warranty when you receive the package.

FLARING Pilot Arc Plasma Cutter,65 Amp Non-Touch Plasma Cutter Machine 120V/240V Dual Voltage Plasma Cutters,1/2"(12.7mm) Clean Cut 4/5"(20mm) Severance Cut with Consumable Set Update 5th FC650DL

LOTOS LTP5000D Plasma Cutter, 2024 Upgraded 5/8" 16mm Clean Cut 3/4" 20mm Severance Cut 50A Non-Touch Pilot Arc Plasma Metal Cutter Machine, Plasma Cutting Equipment, Dual Voltage 120V or 240V, Brown

$309.98 @ Amazon.com

★ 𝟐𝟎𝟐𝟒 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐌𝐨𝐝𝐞𝐥: 5/8-inch (16mm) Clean Cut, 3/4-inch (20mm) Severance Cut, Newly Upgraded PC board, Remarkable 25% Increase in Cutting Power compared to other standard 50-amp plasma cutters.

★ 𝐑𝐞𝐦𝐚𝐫𝐤𝐚𝐛𝐥𝐞 𝟐𝟓% 𝐈𝐧𝐜𝐫𝐞𝐚𝐬𝐞 𝐢𝐧 𝐂𝐮𝐭𝐭𝐢𝐧𝐠 𝐏𝐨𝐰𝐞𝐫: Enhanced with 𝐚𝐝𝐝𝐢𝐭𝐢𝐨𝐧𝐚𝐥 𝐈𝐆𝐁𝐓𝐬 on LOTOS 𝐍𝐞𝐰𝐥𝐲 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐏𝐂𝐁 𝐛𝐨𝐚𝐫𝐝 & 𝐓𝐨𝐫𝐜𝐡, delivering a remarkable 25% increase in cutting power output compared to standard 50-amp plasma cutters. The advanced control systems and precision cutting flames of the newly designed torch ensure high-precision cuts with smooth and fine cut lines. Experience faster cutting speeds without compromising accuracy.

★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly designed upgraded torch and consumables guarantee enhanced precision cutting and increased durability, leading to a much longer consumable lifespan. 𝐓𝐡𝐢𝐬 𝐡𝐞𝐥𝐩𝐬 𝐥𝐨𝐰𝐞𝐫 𝐲𝐨𝐮𝐫 𝐨𝐯𝐞𝐫𝐚𝐥𝐥 𝐮𝐬𝐚𝐠𝐞 𝐜𝐨𝐬𝐭𝐬. The compact plasma cutter features a convenient handle for portability, and it utilizes non-hazardous compressed air to effortlessly cut through various materials, including stainless steel, alloy steel, mild steel, copper, and aluminum.

★ 𝐄𝐚𝐬𝐲 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4" industry-type D plug and air filter regulator enable seamless connection to your air compressor using the existing stand coupler. Setting up the entire machine is effortless and can be completed within 1 minute. ★ 𝐅𝐫𝐨𝐧𝐭-𝐌𝐨𝐮𝐧𝐭𝐞𝐝 𝐑𝐞𝐠𝐮𝐥𝐚𝐭𝐨𝐫: Emphasize the significance of pressure adjustment for attaining precise cutting. Ensures a 100% Air Leakage-Free Guarantee.

★ 𝐋𝐢𝐟𝐞𝐭𝐢𝐦𝐞 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭: we offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞 and 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 along with a 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 covered by our US based lifetime technical support. To avail the warranty, please submit the warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 dedicated customer service team is readily available to assist you through phone or email.

★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.

LOTOS LTP5000D Plasma Cutter, 2024 Upgraded 5/8" 16mm Clean Cut 3/4" 20mm Severance Cut 50A Non-Touch Pilot Arc Plasma Metal Cutter Machine, Plasma Cutting Equipment, Dual Voltage 120V or 240V, Brown

Plasma Cutter 50Amps,110/220V Dual Voltage Plasma Cutting IGBT Inverter Air Touch ARC Metal Cutting Machine 3/4" MAX Cut for Beginners DIY,Upgrade CUT50PRO

$149.99 @ Amazon.com (Save 11%)

【POWERFUL PERFORMANCE】Automatic dual-voltage 110/220V advanced IGBT inverter technology, max cut up to 3/4"& ideal clean cut 1/2",duty cycle 60%. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc.

【EASY TO SETTING】With plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. Only takes 1 min you can start cutting.Recommended current is 50A,conversion line easy transfer from 110V to 220V Home Use, Air Pressure 60-70PSI,duty cycle with 60% at 50A, 100% at 40A.

【LIGHTWEIGHT&PORTABLE】Upgrade plasma cutter machine only weigh 14 pounds, more easy to carry,tiny and light enough to move in any workplace.Conversion line easy transfer from 110V to 220V for home use.

【DURABLE&SAFETY】Cutting smoothly,you can adjust the post-flow time from 2-15 seconds to have a clean cut. When you stop cutting,air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.

【GENERATOR SUPPORTED】Enerator supported this plasma cutter works well with generator,suggest 5000W above generator. 2-year limited warranty and you will get a local supports for any assistance.

Plasma Cutter 50Amps,110/220V Dual Voltage Plasma Cutting IGBT Inverter Air Touch ARC Metal Cutting Machine 3/4" MAX Cut for Beginners DIY,Upgrade CUT50PRO

Reboot Plasma Cutter RBC6000DL PRO, 60 Amp Non Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 4/5 inch Severance Cut, Dual Voltage 120V/240V with Consumables, Upgrade Digital Display

$239.99 @ Amazon.com

🔔【8GEN NON-TOUCH PILOT ARC PLASMA CUTTER】Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.

🔔【UPGRADED DIGITAL SCREEN DISPLAY】 New digital screen centrally display parameters such as air pressure, voltage, and current, add 2T/4T post air/pilot arc time adjustment, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.

🔔【UPGRADED CUTTING PERFORMANCE】Automatic dual-voltage 120/240V. With advanced IGBT inverter technology, 10-60A DC output, 5/8" ideal clean cut and 4/5"maximum severance cut under 220/240V. 10-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.

🔔【VOLTAGE CONVERSION】 The power cord plug installed on the machine is a 110V US standard plug. A conversion cord is included to easily convert 110V to 220V or 120V to 240V for use in your home, shop, or factory. 30A circuit breakers are recommended for 220V and 60A circuit breakers are recommended for 110V.

🔔【UPGRADED FOR PORTABILITY AND LIGHTWEIGHT, EASY TO ASSEMBLE】This plasma cutter machine only weighs 8.5 pounds, easy to carry. The pre-installed quick air coupling, only takes 30 seconds and you can start cutting. Significantly save your preparation time. Package includes: RBC6000DL plasma cutter, plasma cutting torch AG60, ground clamp, air filter regulator, air hose, instruction manual, additional 10pcs of consumables included.

🔔【BUY WITH CONFIDENCE FROM Reboot】Reboot offer a 30 day money-back guarantee and 1-year new replacement warranty covered by our US based lifetime technical support. To avail the warranty, please contact us to activate the warranty when you receive the goods.

Reboot Plasma Cutter RBC6000DL PRO, 60 Amp Non Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 4/5 inch Severance Cut, Dual Voltage 120V/240V with Consumables, Upgrade Digital Display

Reboot 2PCS PT-31 Plasma Cutter Roller Guide Wheel Spacer Circle Compass Stand Off Fit For Touch Arc Plasma Cutter Torch CUT35 CUT40 CUT45 CUT60 CUT50D LGK40 LG40 (not fit ag60 torch）

$9.99 @ Amazon.com (Save 23%)

【PT31 TWO WHEELS SPACER ROLLER GUIDE】The double wheel roller guide can fit PT-31 torch / LG-40 torch, which can work CUT-35,CUT-40,CUT-50D, CUT-60D LGK-40 plasma cutter machine.

【FIT FOR DIFFERENT TYPES OF PT31 TORCH】The positioning screws on the Roller guide can be adjusted to follow and fix different types of PT31 plasma cutting torch.Inner diameter adjustment from 21mm/0.83in to 25mm/0.98in.

【WHEEL HEIGHT CAN BE ADJUSTED】The two wheels of the Roller guide can be adjusted in height, from 45mm/1.77in to 53mm/2.08in.

【PACKAGE INCLUDES】2 pcs PT-31 Roller Guide Assembly.No need to assemble.

【UPGRADED AND THICKEDED】The screw slot does not shift, the roller is smooth and sleek, easy to control the cutting speed.

Reboot 2PCS PT-31 Plasma Cutter Roller Guide Wheel Spacer Circle Compass Stand Off Fit For Touch Arc Plasma Cutter Torch CUT35 CUT40 CUT45 CUT60 CUT50D LGK40 LG40 (not fit ag60 torch）

YESWELDER CUT-55DS Plasma Cutter, 55Amp Non-Touch Pilot Arc Air Power, Large Digital Display 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

$239.99 @ Amazon.com

[NON-TOUCH PILOT ARC] Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

[BUILT-IN POST FLOW] When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.

[POWERFUL CUTTING ABILITY] 20-55 output, ideal clean cut: 3/10''@110V,1/2''@220V, max cut: 3/5''@110V,4/5''@220V. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

[DIGITAL DISPLAY] Advanced digital display, increases the visual clarity and improves the efficiency of the operation.

[LIGHTWEIGHT AND PORTABLE] Allows for connection to 110 or 220 volt receptacles without tools, Portable in the shop or at the job site—at 11.55lb, allows the user to easily move from location to location.

[ADDED SAFETY] Certificated by ETL, automatic compensation for voltage fluctuation, over current protection, over load protection, temperature control.

YESWELDER CUT-55DS Plasma Cutter, 55Amp Non-Touch Pilot Arc Air Power, Large Digital Display 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

ARCCAPTAIN 60PCS PT31 Plasma Cutting Consumables Fit CUT-45 CUT-50 CT-312 with Plasma Cutter Torch PT-31 JG-40 LG-40

$14.99 @ Amazon.com

Package Include: 5 Shield Cups, 30 Nozzles, 10 Swirl Baffle, and 15 Electrodes.

Fit More Options: These plasma cutting consumables perfectly fit PT-31, JG-40 and LG40 plasma cutting torch. Please note that these consumables are not suitable for AG60 torch.

Wide Compatibility: These plasma torches consumables suitable works with plasma cutting machines such as CUT50, CUT-45, CUT-40D, LGK-40, CT312, CT312D, CT416, CT416D, CT518, CT518D, CT520D, Super160, Super160P etc.

Premium Material: Our plasma cutter accessories are meticulously crafted from high-quality metal and ceramics, ensuring unmatched durability and reliability, offer a longer lifespan.

Ensure Cutting Quality: Timely replacement of accessories will help you maintain the plasma cutter machine performance, ensuring great cutting results.

ARCCAPTAIN 60PCS PT31 Plasma Cutting Consumables Fit CUT-45 CUT-50 CT-312 with Plasma Cutter Torch PT-31 JG-40 LG-40