BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

$25.01 @ Amazon.com (Save 5%)

Quality magnetic ground clamp with copper center post

Max amperage is 800 amps

Strong 55 pound pull magnet

Convenient handle for disconnecting magnet from work piece

BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

$21.49 @ Amazon.com (Save 30%)

Quality magnetic ground clamp with brass center post

Max amperage is 250 amps

Strong 55 pound pull magnet

Convenient handle for disconnecting magnet from work piece

BESSEY MGC-1 Magnetic Ground Clamp, 250 AMP

BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

$32.99 @ Amazon.com

[Switchable Magnet Welding Holder] - Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces.

[Easy to Use] - Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off.

[Fast Cooling Design] - All new fin design lowers the temperature by almost 27 percent, It has a stronger hold in shear (vertical) position and allows for use with heavy gauge ground cable.

[ON/OFF Control] - The ON/OFF control makes the metal dust fall off without cleaning, simple to use.

[Warm Tips] - Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials.

200A Magnetic Welding Ground Clamp,On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder, Grounding Magnet Connector

BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

$9.99 @ Amazon.com (Save 18%)

Allows you to ground your work piece with ease.

The quick release magnet makes hooking up your welding lead very easy.

The 500 AMP magnetic ground will support welding and extremely high amperages.

Hobart 770566 500-Amp Magnetic Ground Clamp

BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

$59.99 @ Amazon.com

➤【Switchable Magnet Welding Holder】- Our 600A magnet welding holder is used to lay the ground clamp magnetically attached to the metal being welded for electrical ground.

➤【Fast Cooling Design】- All new fin design lowers the temperature by almost 27 percent, It has a stronger hold in shear (vertical) position and allows for use with heavy gauge ground cable.

➤【Easy to Use】- Our magnet strength can provide 70KG pulling force, just flip the switch to quickly generate a strong pulling force, which can fully meet the industrial requirements of professionals.

➤【ON/OFF Control】- The ON/OFF control makes the metal dust fall off without cleaning, which is convenient and simple to use.

➤【Warm Tips】- Make sure that the grounding device is in the off state when it is not in contact with the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials.

600A Magnetic Welding Ground Clamp, Switchable Magnet Welding Holder, Grounding Magnetic Connector Earth Switch for Welding Fixed

BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

$59.00 @ Amazon.com

Having issues finding a reliable welding ground clamp? Our magnetic ground clamps come with the new fin design which lowers temperature by 27 percent. The magnetic hold is very strong and will not slip off table easily during use. Simply place our heavy duty clamp on a clean work surface, turn on and start welding

SAVE TIME: Fast setup with instantly ground to any flat and round steel surface. Finned magnetic ground clamps let welders quickly set up with no prep, weld and move on to the next job. Finned clamp also increases tool longevity by keeping it cooler. No more searching for or creating a ground location. Use it with tig, spot, stick torch, fiber, arc welders

EXTRA PERKS: Stronger hold in the shear (vertical) position allows for use with a heavy gauge welding ground cable. Reusable to save welders time and money. No more tacking on tabs in large sheet-weld or pipe jobs. Does not require an electrical power source

ON/OFF SWITCH: The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Magnetic grip turns all the way off for quick release. No need to pry or fight magnet for precise positioning. Turn on for instant grounding and hold

EASY TO CLEAN: Powerful Magnet stays clean unlike traditional magnetic squares that hold on to metal chips even when off, with our heavy duty magnet you won’t cut your fingers cleaning away steel shavings and debris. When turned off debris falls off

Magswitch 300 Amp Magnetic Welding Ground Base Clamp Holder for Welding Kit, Tools, Supplies and Accessories, Magnet Switch with On/Off Grounding Capabilities, (8100746)

BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

$26.99 @ Amazon.com

[Strong Magnetic Welding Ground Clamp] Welding clamp features a super strong built-in magnet(Φ3.34”) that easily adheres to smooth, rough, curved, or flat metal surfaces, providing excellent stability and preventing the magnet from dropping off easily

[High-Temperature Resistant and Strong Gripping Power] Powerful magnetic welding grounds have strong gripping power and magnetically attach to your ferrous metal work surface. Simply secure ground cable over the stud to ensure excellent electrical ground

[Quick Release and Easy to Use] The magnetic welding clamp has a quick-release magnet that makes hooking up your welding lead very easy, allowing you to ground your workpiece with ease. Welding clamp is compact, lightweight, and easy to carry and store

[Non-demagnetized and Durable] Made of high-quality materials, this magnetic clamp is sturdy and durable for long-term use. It can fix a large number of metal items such as steel plates, pipes, and angle irons, making welding more stable and accurate

[Universal and Versatile Tools] This magnet has a very strong suction to hold metal items firmly in place, perfect for welding work. It is of good quality, well and very durable, making it a convenient tool for welding work

MUTUACTOR 500 AMP Magnetic Welding Ground Clamp, Φ3.34” Strong Gripping Quick Release Magnetic Mount Welding Support Clamp Tools for Welding Cutting Factories Industries Work and Instrument Processing

BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

$34.99 @ Amazon.com

Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces.

200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off.

Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use.

Package Included:1 x Welding Ground Clamp

Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials.

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

$69.99 @ Amazon.com

Effortless Setup: Streamline your welding process with our magnetic ground clamp featuring an intuitive on/off switch, ensuring swift and hassle-free setup for increased productivity.

Versatile Grip: Our clamp boasts a robust construction designed to securely grip both flat and round surfaces, offering versatility for a wide range of welding applications, enhancing your project efficiency.

Instant Grounding: Say goodbye to tedious tasks like tacking on tabs or hunting for grounding points. Simply place our clamp on a clean surface, activate the switch, and enjoy instant grounding, optimizing your workflow.

Clean Workspace: Thanks to its magnetic field that turns off completely, our clamp helps maintain a pristine work area, minimizing disruptions and ensuring a professional environment conducive to high-quality welding.

Dependable Stability: Experience a strong and reliable grip on surfaces, whether flat or round, ensuring stability and precision throughout your welding tasks, catering to the demands of professionals and enthusiasts alike.

Arc-Zone 300 Amp Magnetic Welding Ground Base Clamp with On/Off Switch for Weld Tool Kit and Accessories

BESSEY MGC-2 Magnetic Ground Clamp, 800 AMP

$18.95 @ Amazon.com

No matter where you’re welding, you can ground your weld fast with this handy magnetic welding block. A high powered magnetic base sticks to ferrous metal, making it perfect for pipe and pieces that are difficult to clamp.

High powered magnetic base sticks to anything you weld

Perfect for pipe and pieces your grounding clamp can't grab

Threaded brass stud

4" Diameter

Magnetic Ground Grounding Block Magnet Clamp for Arc Welder Welding Ground Wire