TOOLIOM 135A welder Review

TOOLIOM 195A Stick Welder 110/220V Dual Voltage MMA Welder Digital Display IGBT Inverter Hot Start Arc Force Anti-Stick Welding Machine fits 5/32in. (4mm) Welding Rods

$99.99 @ Amazon.com (Save 9%)

Can handle E6010 cellulose electrode, ideal for below 5/32 in.(4.0mm) welding rods.Up to 195A, applicable of welding mild steel, carbon steel, stainless steel and cast iron.

Built in Hot-start make the arc strik easier, Anti-stick can remove the electrode from the workpiece easily, Arc-force provide smoother welding and deeper penetration.

Equipped with multiple protection functions,such as over current protection, over load protection,temperature control.

Easy to operate for beginner , can read the output welding current with smart digital display.

Comes with a easy carrying handle easy for carry, can be used anywhere you need.

TOOLIOM 195A Stick Welder 110/220V Dual Voltage MMA Welder Digital Display IGBT Inverter Hot Start Arc Force Anti-Stick Welding Machine fits 5/32in. (4mm) Welding Rods

TOOLIOM 200M MIG Welder 3 in 1 Flux MIG/Solid Wire/Lift TIG/Stick Welder 110 / 220V Dual Voltage Welding Machine

$269.99 @ Amazon.com (Save 10%)

Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.

Multi-functions in one machine: Suitable for stick, lift TIG(torch is not included), flux MIG, gas MIG

Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate.

Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030"(0.8mm) with solid core wire, and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode.

Dual voltage input design: Welding machine can be plugged into 110（120）V / 220(230)V dual voltage (Automatic fitting).

TOOLIOM 200M MIG Welder 3 in 1 Flux MIG/Solid Wire/Lift TIG/Stick Welder 110 / 220V Dual Voltage Welding Machine

TOOLIOM TIG Welder with Pulse Welding Machine Multifunctional DC TIG/Spot TIG/Pulse TIG/Stick 110&220V Dual Voltage

$193.05 @ Amazon.com

3 functions in 1 machine：Capable of DC TIG/Pulsed TIG/Stick,including spot TIG welding that is suitable for welds reinforcement

Remote Control：Reserved 5 pin foot pedal interface, can be connected with foot pedal to turn ON/OFF and adjust the current.

Up to 200A,equipped with hot start and arc force function for stick welding.

Suitable for stainless steel, alloy steel, iron or other non-ferrous metal welding.

Certificated by ETL：Intelligent protection includes over-voltage, over-current, over-heat protection.

TOOLIOM TIG Welder with Pulse Welding Machine Multifunctional DC TIG/Spot TIG/Pulse TIG/Stick 110&220V Dual Voltage

TOOLIOM 3 in 1 Cut/TIG/MMA Welder 50A Air Plasma Cutter 200A TIG and 200A Stick Welder Portable Welding Machine Dual Voltage 110&220V

$319.99 @ Amazon.com (Save 6%)

3 in 1 Multi-functions welding machine: 50A Plasma Cutter & 200A TIG Welder & 200A Stick Welder.

Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.

Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.

Foot Remote(Not Included)/Proximity Control: Compatible with 5pin foot pedal to adjust the current.

Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.

TOOLIOM 3 in 1 Cut/TIG/MMA Welder 50A Air Plasma Cutter 200A TIG and 200A Stick Welder Portable Welding Machine Dual Voltage 110&220V

TOOLIOM Lift TIG Torch 150A Air Cooled Welding Gun for TOOLIOM TL-195S TL-200M TL-250M Pro Welding Machine

$45.99 @ Amazon.com

Up to 150A,WP-17V model

4M cable length, 35-50 connection

Style: Air-Cooled TIG welding torch

Suitable for TL-195S,TL-200M,TL-200T,TL-250M Pro

Package Contents: 1*lift TIG torch,3*collet,1*collet body ,3*alumina ceramic cup,1*long back cap and 1*short back cap

TOOLIOM Lift TIG Torch 150A Air Cooled Welding Gun for TOOLIOM TL-195S TL-200M TL-250M Pro Welding Machine

TOOLIOM Arrow Welding Magnets 4pcs 50 LB Strong Hold Magnetic Welding Holder Welder Magnet Set Welding Accessories

$18.99 ($4.75 / Count) @ Amazon.com

Powerful Welding Magnets:Strong magnet embedded in welding holder,hold any ferrous metal objects up to 50 lbs.

Multi-angle design:Arrow-shaped welding magnet,hold the workpiece at 45,90 and 135 degrees.

Helpful tools for holding pieces at the right angle.Frees up your hands to make welding job more accurately and efficiently.

High quality material,durable and useful.Use for welding project ,soldering,pipe installation and so on.

Package:4 Pieces 50 LB welding magnets included in this Package.

TOOLIOM Arrow Welding Magnets 4pcs 50 LB Strong Hold Magnetic Welding Holder Welder Magnet Set Welding Accessories

TOOLIOM MIG Welding Gun Torch Stinger 150Amp 10ft(3m) Euro Connector for TL-200M

$45.99 @ Amazon.com

TOOLIOM MIG Welding Gun Torch Stinger 150Amp 10ft(3m) Euro Connector for TL-200M

TOOLIOM CO2 Argon Flow Meter Gas Regulator Gauge with Gas Hose Mig Tig Welding

$27.99 @ Amazon.com

Argon/CO2 regulator:Pressure gauge and flow meter combined design, great choice for MIG or TIG welder.

Easy to install: Equiped with a CGA-580 inlet connection, fits Argon, Argon/CO2 mixed gas Tanks.

Pressure gauge shows how much gas is left in the gas tank, reads from 0 to 4000 psi.

The output flow is indicated by a ball which moves up and down in the square flow tube, the scale (from 0 to 60 CFH) is easy to read.

It comes with 8.2ft (98inch) hose. The flowmeter outlet fits both the male 5/8" x 18 fitting and the female 9/16" x 18 nut.The regulator body and fitting are made of brass material.

TOOLIOM CO2 Argon Flow Meter Gas Regulator Gauge with Gas Hose Mig Tig Welding

HONE Stick Welder, 110V/220V Actual 140Amp ARC Welder Machine, IGBT Inverter Digital Display LCD Welding Machines with Hot Start Arc Force Anti-Stick, High Efficiency for 1/16"-1/8" Welding Rod.

$99.80 @ Amazon.com (Save 23%)

➠【Digital IGBT Inverter Technology】This ARC welder come with advaced unique IGBT control mode improves the reliability of welding machine. Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current, the pretty nice beads, specially when in small welding current.

➠【Suitable for Series Welding Rod】The welder has amazing hot-start, is ideal for the rods AWS E6013 E7018 E6011 of 1/16"-1/8"(1.6mm-3.2mm), you just take the rod touching the workpiece, arc striking immediately, also can handle E6010 cellulose electrode, capable of welding mild steel, carbon steel, stainless steel and cast iron.

➠【Safe and Stable】This welding machine has Anti-stick function easy the electrode removal from the workpiece, and closed-loop feedback control and multiple protection functions set internally, to prevent over heat, over current, over-voltage, under-voltage and short circuit damage to make sure safely operation.

➠【Easy to Operate】The soldadora inverter 110V 220V equiped with digital display and trouble indicate, the real welding current be shown, is so easy to use that it can be used by novice or master welder. No matter is man or woman welders.

➠【Portable and Support】HONE welder with a easy carrying handle, compact design, light weight, easy for carrying and storage, very convenient, can be used anywhere you need. If you meet any problem while using, please feel freely to contact us at the first time. Our customer service will help you fix it in 24 hours. Just buy it with confidence, let's weld!

HONE Stick Welder, 110V/220V Actual 140Amp ARC Welder Machine, IGBT Inverter Digital Display LCD Welding Machines with Hot Start Arc Force Anti-Stick, High Efficiency for 1/16"-1/8" Welding Rod.

TOOLIOM Auto Darkening Welding Helmet True Color 1/1/1/1 Flip Front Welding Hood Large Viewing 3.94"x 2.34" Shade Range 4/5-9/9-13 Solar/Battery Powered Welder Mask for TIG MIG MAG MMA Welder Helmet

$39.99 @ Amazon.com

Auto darkening flip front lens welding mask can meet different welding needs.Viewing Area:3.94 inch x 2.34 inch (100mm x 59.5mm) .

Material:PP helmet with true color lens(1/1/1/1 optical clarity rating),lightweight and durable.

Lens feature:5-9/9-13 darkening shade range and DIN4 in light state,ideal for welding,cutting,grinding.Protect grade against UVB:DIN16. Fast darkening in 1/30000s to reduce strong light.Adjustable delay time:0.1-0.8S.

4 Arc sensors and adjustable headgear,comfortable to wear;Powered by replaceable lithium battery and solar,suitable for long-lasting working time.(rated capacity of lithium battery:1200mAh)

Includes 1pc welding helmet,1 pc outer protective lens,1 pc inner lens and 1 User Manual.Approved by ANSI.

TOOLIOM Auto Darkening Welding Helmet True Color 1/1/1/1 Flip Front Welding Hood Large Viewing 3.94"x 2.34" Shade Range 4/5-9/9-13 Solar/Battery Powered Welder Mask for TIG MIG MAG MMA Welder Helmet