Polyurethane Plastic Welding Rod, 1/8 in. diameter, 30 ft., Natural

WISUNO Welding Rods,E7018 1/8'' 1LB,Carbon Steel Stick Electrodes

$10.99 @ Amazon.com

Product Introduction: E7018 welding rod is suitable for both AC and DC applications and can be used for all position welding

Welding performance: simple operation, easy arc initiation, super stable arc, beautiful weld seam, easy slag removal, and less likely to splash

Scope of application: This welding rod is particularly suitable for welding low carbon steel structures, whether it is thin plate small parts or cover welding that requires a beautiful and smooth weld surface. It can easily handle both

Welding quality: The chemical composition of the deposited metal is strictly controlled to ensure welding quality. Mechanical performance tests show that its strength and elongation meet excellent standards, demonstrating excellent quality

Adaptive current: E7018 electrode diameter corresponds to welding current reference values: 1/16 ": 25-40A, 5/64": 40-60A, 3/32 ": 50-80A, 1/8": 100-125A

【Precautions】 Before welding, the electrode must be baked at 350-380°C for 1 hour and used immediately after baking. All impurities such as rust, oil, and moisture on the workpiece must be removed prior to welding. During welding, use a short arc and minimize the weaving width, favoring narrow bead welding. To prevent arc-striking porosity, employ a run-on tab or the strike-and-return technique for arc initiation.

WISUNO Welding Rods,E7018 1/8'' 1LB,Carbon Steel Stick Electrodes

Forney 30805 7018 Welding Rod,1/8-Inch

$26.20 @ Amazon.com (Save 11%)

The product is 5LB 1/8" 7018 Weld Rod

Easy to use

All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+

Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues

Not recommended for use with low open circuit-Voltage OCV power sources

Forney 30805 7018 Welding Rod,1/8-Inch

uxcell Aluminum Round Rod, 1 Inch Diameter 6061 Solid Lathe Metal Bar 8 Inch Length for DIY Craft Tool

$13.79 @ Amazon.com

The aluminum round bar is made of 6061 aluminum, strong rust-resistant, and corrosion-resistant, sturdy and durable, suitable for gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, etc.

Length: 203mm / 8 inch; Diameter: 26mm / 1 inch; Packing Content: 1 x aluminum rod.

Our round aluminum bar has high strength and hardness, a smooth surface without burrs, good corrosion resistance, oxidation resistance, and not easy to rust. Widely used as industrial structural parts, such as manufacturing furniture, mechanical parts, precision machining, and extensive industrial materials, etc

Easy to machine aluminum rods for milling or lathe work in a variety of applications and industries.

All the sizes are measured manually, please allow +/-0.2 inch error. Confirm the size before ordering.

uxcell Aluminum Round Rod, 1 Inch Diameter 6061 Solid Lathe Metal Bar 8 Inch Length for DIY Craft Tool

TOOLIOM Aluminum TIG Welding Rod ER4043 Welding Wire Filler Rod 1/8"(3.2mm) x 16" 5LB

$32.29 @ Amazon.com (Save 5%)

ER4043:Aluminum TIG welding rod with 5% silicon added.High silicon content,improve the fluidity of the weld pool

Size:1/8"(3.2mm) in diameter,16”(406.4mm) in length

Feature:Stable arc and minimal amount of spatter.low sensitivity to weld cracking. Can be welded with Argon,Helium or Argon/Helium-mixtures as the shielding gas

Wide applications:Ideal for welding on various grades of aluminum alloys such as 3003,3004,5052,6061,6063,and casing alloys 355,356,and 214

Package included:1/8" x 16" ER4043 rods 5 lbs packed in a plastic case

TOOLIOM Aluminum TIG Welding Rod ER4043 Welding Wire Filler Rod 1/8"(3.2mm) x 16" 5LB

TRQWH E4303 (J422) Sticks, 3/32"-1/8" Carbon Steel Arc Welding Rods Welding Electrode, Electrode Rods (3/32"-1lb)

$17.99 @ Amazon.com

Material: premium stick welding electrodes E4303 rods. E4303 (J422) Welding Rod is calcium-titanium coated carbon steel electrode.

Dimensions: 1/8" x 14" and 3/32" x 12". Weight: 1 lb.

Practicality: Excellent welding process performance and good force performance, arc stability, easy to clean slag, easy to re-arc, weld seam shape is beautiful.

Application: Used for welding more important low-carbon steel structures and low-alloy structures of strength grades.

Storage: Store in a cool, dry and ventilated place.

TRQWH E4303 (J422) Sticks, 3/32"-1/8" Carbon Steel Arc Welding Rods Welding Electrode, Electrode Rods (3/32"-1lb)

1" Aluminum 6061 Round Rod 8" Long, 1" Diameter Solid T6511 New Lathe Bar Stock

$13.98 @ Amazon.com

✿---- Our 6061 aluminum rods has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld, you will love it.

✿---- Aluminum round stock is an excellent multi-purpose engineering material that will not rust and has a long service life.

✿---- 6061 aluminum round rod is well finished, all pieces are precisely cut and smooth without burrs, no dinks or scratchess.

✿---- Aluminum round rod are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on.

✿---- As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product.

1" Aluminum 6061 Round Rod 8" Long, 1" Diameter Solid T6511 New Lathe Bar Stock

ARCCAPTAIN E7018 Welding Rod 1/8'' 5LB Low Hydrogen Carbon Steel Welding Sticks Electrodes, Welding Rods ARC Welding Equipment

$26.99 @ Amazon.com

E7018 Welding Rod: Diameter: 1/8"; Length: 14"; Weight: 5 lb.

Welding Rod Model: E7018 is an iron powder electrode with low hydrogen content, delivering high-quality x-ray welds. It is suitable for welding in any position using AC or DC reverse polarity.

Advantages: Outstanding X-ray values, high tensile strength, and good resistance to cracking allow for use in a variety of welding positions.

Performance: E7018 welding rods have high melting efficiency, a smooth and stable arc, and less spatter. The low hydrogen content and few defects ensure high-quality welds.

Widely Used: E7018 stick welding rods are ideal for low, medium, and high carbon steels, and structural components. They are used in steel structures and frames, high-pressure pipelines, oil pipelines, ship hulls, marine structures, power generation and substation equipment, steel bridges, and support structures.

ARCCAPTAIN E7018 Welding Rod 1/8'' 5LB Low Hydrogen Carbon Steel Welding Sticks Electrodes, Welding Rods ARC Welding Equipment

YESWELDER E7018 3/32"(2.5lb)+1/8"(2.5lb) Welding Rod Carbon Steel Stick Electrodes, Dual Specification Welding Rods

$26.99 @ Amazon.com

MODEL: E7018 is a low-hydrogen iron powder type electrode that produces high quality x-ray welds. It can be used in all positions on AC or DC reverse polarity welding current.

FEATURES: All position welding, recommended for welding medium grade carbon steels where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional electrodes.

PERFORMANCE: Steady arc, low spatter, excellent re-striking ability and high deposition efficiency.

APPLICATION: Low-alloy structurals, low, medium and high carbon steels, offshore rigs and power plants, steel structures, tack welds for tubular wire applications.

SPECIFICATION: Diameter: 3/32"(2.5LB)+1/8"(2.5LB); Length: 14"; Weight: 5LB. Recommended Amperages: 115A-165A.

YESWELDER E7018 3/32"(2.5lb)+1/8"(2.5lb) Welding Rod Carbon Steel Stick Electrodes, Dual Specification Welding Rods

Gisafai 2 Pcs 1" Diameter Round Carbon Steel Rod Hot Rolled Unpolished Stock for Drilling Forging Machining Fabrication(6 Inch)

$18.99 @ Amazon.com

Enough Quantity: you will receive 2 pieces of steel rods, can well meet your use, replacement and sharing needs, providing you with a good using experience

Size Information: products are manufactured to the metric system, each carbon steel rod measures about 0.98 inch/ 2.5 cm in diameter, 5.9 inches/ 15 cm in length, and can be cut and welded to suit your different purposes; Please check the size before ordering

Fine Workmanship: utilizing the hot rolling technology in our steel bar's production result in reliable quality, stable performance and durability, the steel rod features a smooth surface and low rusting resistance, also not easy to break or deform

Wide Range of Uses: this steel rod can be applied for manufacturing bearings, precision component processing, mechanical equipment and precision machinery manufacturing, industrial applications such as cutting; Also use for residential structural

Unpolished Design: the steel rod comes with an uncoated finish, not easy to rust, it means that any metal coating can easily adhere to the steel rod, providing you with the option for further customization according to your requirements

Gisafai 2 Pcs 1" Diameter Round Carbon Steel Rod Hot Rolled Unpolished Stock for Drilling Forging Machining Fabrication(6 Inch)

YESWELDER E7018 1/8'' 5LB Welding Rod Low Hydrogen Carbon Steel Stick Electrodes

$26.99 @ Amazon.com

MODEL: E7018 is a low-hydrogen iron powder type electrode that produces high quality x-ray welds. It can be used in all positions on AC or DC reverse polarity welding current.

FEATURES: All position welding, recommended for welding medium grade carbon steels where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional electrodes.

PERFORMANCE: Steady arc, low spatter, excellent re-striking ability and high deposition efficiency.

APPLICATION: Low-alloy structurals, low, medium and high carbon steels, offshore rigs and power plants, steel structures, tack welds for tubular wire applications.

SPECIFICATION: Diameter: 1/8''; Length: 14''; Weight: 5LB. Recommended Amperages: 115A-165A.

YESWELDER E7018 1/8'' 5LB Welding Rod Low Hydrogen Carbon Steel Stick Electrodes