Versachem 47809 Plastic Welder – 25 ml Dev-Tube

If you are looking to buy a plastic welder, you can check Versachem 47809 Plastic Welder as well. Well, these plastic welders don’t cost much, so there is not much risk if the thing didn’t work in your favor. To me, it looks like a nice plastic welder because most of the reviews are positive in the favor of this plastic welder. You can use this plastic welder to join two parts of plastic if it is broken. Of course, you can join two separate parts as well. I read a user’s review, who used this Versachem plastic welder to glue in a headlight on his Hyundai as the bracket within the bumper was broken. Also, this user said that this plastic welder would work in any seasons, winter or summer.

On the other hand, a user suggest that you have to be aware that a bit of mixing will be needed because this is an epoxy but the twin tubes do not mix, they just dispense. So, some swirls may do the trick. Also, before you perform the welding, please try to clean the surfaces well so that the joint would be good. On the other hand, a user said that it is an industrial-class plastic welder, so the odor is much stronger than others. Also, it may not be a good plastic welder for all types of plastic, so please consider this fact if you are going to purchase Versachem 47809 Plastic Welder. Read more…

About WelderReview.com

WelderReview.com reviews a wide range of welding machines and other related tools such as welding helmets, carts, clamps, gloves, kits, hoods, masks, rods, wires and other welding accessories from leading brands such as Millar, Lincoln, Hobart and others.

View all posts by WelderReview.com →

Best Versachem 47809 Plastic Welder 25 Ml Deals

VersaChem 47809-12PK Plastic Welder - 25 ml Tube, (Pack of 12)

Image of VersaChem 47809-12PK Plastic Welder - 25 ml Tube, (Pack of 12)

Product Highlights

  • ✅ Strong structural adhesive formulated for bonding dissimilar materials and unprepared metals
  • ✅ Minimal surface preparation required
  • ✅ Handling time: 4-5 minutes; Set time: 10-15 minutes; Cure time: 24 hours
  • ✅ Non-sagging, waterproof formula

Devcon 22045 Plastic Welder - 25 ml Dev-Tube

Image of Devcon 22045 Plastic Welder - 25 ml Dev-Tube

Product Highlights

  • ✅ Thick formula fills gaps
  • ✅ Water resistant
  • ✅ Dries cream colored
  • ✅ Tensile strength: 3,500 psi

Devcon (22045-6PK) Plastic Welder - 25 ml Dev-Tube, (Pack of 6)

Image of Devcon (22045-6PK) Plastic Welder - 25 ml Dev-Tube, (Pack of 6)

Product Highlights

  • ✅ Strong structural adhesive formulated for bonding similar and dissimilar materials
  • ✅ Minimal surface preparation required
  • ✅ Cured adhesive can be drilled, sanded and painted
  • ✅ Tensile strength: 3500 PSI

ATOLS Upgraded Plastic Welder, 1000PCS Staples, Pure Copper Transformer, Rapid Heating, Plastic Welding Kit, Hot Stapler Kit, Plastic Welder Gun Kit, Car Bumper Repair Kit, Plastic Repair Kit(Red)

Image of ATOLS Upgraded Plastic Welder, 1000PCS Staples, Pure Copper Transformer, Rapid Heating, Plastic Welding Kit, Hot Stapler Kit, Plastic Welder Gun Kit, Car Bumper Repair Kit, Plastic Repair Kit(Red)

Product Highlights

  • ✅ Multipurpose Fit: Repairs at least 98% of the plastics on the market. Suitable for repairing: bumper, dashboard, lamp holder, plastic ring, radiator, spoiler, handles, headlights, plastic wings, car and motorcycle plastic device, etc
  • ✅ Rapid Heating: Plastic Welding Kit select the correct staples, insert the brass holder, press the power button, 1-2 seconds to heat quickly, let the staple melt slowly into the plastic parts, prevent the staple from going through the plastic board. Equipped with a light on the front of our plastic welding machine, the operation is more convenient and safer
  • ✅ Reliable Quality: Stainless steel staple will not rust and 6 types of staples to meet your different needs. The wavy staple design maximizes the load. Restore your broken parts, prolong its service life. Staple weld into the plastics quick and easily. Strong for shock and twist after repairing
  • ✅ Easy Operation: Ergonomic design, suitable for palm. The rubber handle has a comfortable grip and will not feel tired for a long time holding. Quick and easy operation

Versachem 73009 Super Clear Silicone - 3 oz.

Image of Versachem 73009 Super Clear Silicone - 3 oz.

Product Highlights

  • ✅ Strong, versatile, clear silicone sealant; forms a tough, rubber, flexible, waterproof seal
  • ✅ Resists aging and weathering without hardening, shrinking, or cracking
  • ✅ Chemical solvent resistance to motor oil, gasoline, brake fluids, transmission fluids, grease, alcohol, and antifreeze mixtures
  • ✅ Temperature Range: -76°F to 350°F (-60°C to 177°C)

100W 2-in-1 Plastic Welder Kit with Soldering Iron Tips and 56 Welding Rods | 3-Speed Temperature Control Plastic Welding Gun for DIY Repair of Car Bumper, Dashboard, Kayak

Image of 100W 2-in-1 Plastic Welder Kit with Soldering Iron Tips and 56 Welding Rods | 3-Speed Temperature Control Plastic Welding Gun for DIY Repair of Car Bumper, Dashboard, Kayak

Product Highlights

  • ✅ 100W Fast Heating with 3 Temperature Settings: This plastic welder features a powerful 100W motor that heats up quickly in seconds, saving time and improving work efficiency. With 3 adjustable temperature settings, it is easy to switch based on different plastic materials and repair needs.
  • ✅ 2-in-1 Design for Plastic Repair and Soldering: The kit includes 2 welding tips and 1 soldering iron tip, allowing it to work as both a plastic repair tool and a soldering iron kit. It is suitable for a wide range of repair tasks, from plastic cracks to basic soldering work.
  • ✅ 56 Plastic Rods for Multiple Materials: This set comes with 56 plastic rods in 7 types, including ABS, PP, PE, TPE, PC, PUR, and PA. It supports different repair needs and is ideal for fixing car bumpers, dashboards, kayaks, household plastic parts, and more.
  • ✅ Comes with Helpful Accessories for Plastic Repair: The kit includes stainless mesh, foil tape, sandpaper, screwdriver, metal brush, and an iron stand, giving you the tools needed for sanding, reinforcing, repairing, and holding work in place for a more complete repair process.

Upgraded 220W Plastic Welder, 2 in 1 Plastic Welding Kit Plastic Repair Welder Kit 1000PCS Hot Stapler Soldering Gun with 100PCS Plastic Welding Rods Car Bumper Repair Kit for Most Plastic Repair

Image of Upgraded 220W Plastic Welder, 2 in 1 Plastic Welding Kit Plastic Repair Welder Kit 1000PCS Hot Stapler Soldering Gun with 100PCS Plastic Welding Rods Car Bumper Repair Kit for Most Plastic Repair

Product Highlights

  • ✅ 220W Rapid Heating:The plastic welding machine has a power of 220 watts and a 110V-US plug, which has higher output current and faster heating speed. Using heat to embed nails or plastic rods into plastic will not cause damage to the car or plastic surface, and is very sturdy. Not only are there two repair methods to choose from: welding rods and hot nails, but there is also an overheat protection device to ensure your safety
  • ✅ Upgrade Accessories: Plastic weld kit are equipped with 6 types of 1000pcs hot staples, 100pcs plastic rods(ABS/PP/PE/TPE/PC/PUR/PA/LDPE/TPO)for different types of repairs. The plastic rods is used in conjunction with Patch Net to effectively repair plastic surfaces. Wipe with a sponge before and after repairing to make the surface clean and smooth
  • ✅ Multi-purpose:This welding repair kit can not only repair car bumper fenders, the equipped 12 types of plastic welding rods can also be used to repair various plastics such as ABS, PP, TPO, TPE, etc. Such as car dashboards, motorcycles, kayaks, canoes, children's riding toys, recycling bins and other plastic products
  • ✅ Humanized Design: The non-slip rubber handle is easy to handle, and it will not hurt when you hold it for a long time. LED headlamps give you better visibility in the early dark. The operation is simple and easy to use, making you a professional to repair various plastic materials easily and effectively

Portable Plastic Crack Repair Kit, 100W 110V Plastic Welder Kit | Plastic Welder Tool for Car Bumper, Kayak and Broken Plastic Restoration

Image of Portable Plastic Crack Repair Kit, 100W 110V Plastic Welder Kit | Plastic Welder Tool for Car Bumper, Kayak and Broken Plastic Restoration

Product Highlights

  • ✅ PORTABLE 100W PLASTIC WELDING SOLDERING IRON:110V 100V plastic welder built with power indicator and on-off switch. Non-slip insulated handle and optimized heat dissipation structure for safer handheld operation. It melts matching plastic rods to seal cracks on compatible plastic parts.
  • ✅ LIMITED INTERMITTENT USE REQUIREMENT:This plastic repair welder is designed for intermittent use only. Extended continuous operation will cause to overheating and damage the heating core. Take regular breaks to cool down and prolong service life.
  • ✅ COMPATIBLE WITH SPECIFIC PLASTIC MATERIALS:Works for PP, TPO and TEO plastic products including car bumpers, dashboards, kayaks and plastic water tanks. It cannot weld ABS, PVC, PC and other incompatible plastics. Verify plastic material before purchase.
  • ✅ COMPLETE SET OF REPAIR SUPPLIES:Package contains 1 plastic welding iron, 20 black plastic rods, 20 white plastic rods, 2 welding tips, 5 pieces foil tape, stainless steel mesh, sandpaper, metal stand, cleaning brush and user guide.

WEP 960-V Plastic Welder Kit 110V with LED Lights with 200 Hot Staples and Pliers for Car Bumper Plastic Welding, Plastic Gas Tank Repair, a Great Automotive Tools for Mechanics

Image of WEP 960-V Plastic Welder Kit 110V with LED Lights with 200 Hot Staples and Pliers for Car Bumper Plastic Welding, Plastic Gas Tank Repair, a Great Automotive Tools for Mechanics

Product Highlights

  • ✅ Great Repair Tool: WEP 960-V plastic welder is great for repairing cracks in ABS plastics such as car bumper, plastic gas tank, car dashboard and more. The hot staples gets heated rapidly when you press the activation button, and you can embed the staples into plastic cracks to join the two broken pieces. Once done joining, pull to separate, and cut away the excess staple. Plastic welding is easy as that!
  • ✅ Plastic welding kit: Our plastic welding tools kit include a pair of cutters, 200 pcs of hot staples (50 each for outer corner cracks, inner corner cracks, small/straight cracks, large/curved cracks.) and a 110V WEP 960-V plastic welder. Our hot stapler plastic repair kit is suitable for a wide range of environments with built-in LED light. The light provides consistent lighting directly on the plastic weld point for low-light environment, this tool is a perfect addition to your tools kit.
  • ✅ Time saver: Sending plastic parts for repair or replacement is time-consuming and expensive, why not pick up a tool to perform a simple repair! This tool is suitable as automotive tools for mechanics for motorcycles, car bumpers, plastic parts, or normal household plastic parts.
  • ✅ Safety Function: This plastic stapler comes with protection functions to prevent potential overheating, and protects the user. At the same time, our plastic welder uses quality US specification power cord (length: 53.9inches/137cm). NOTE: Plastic welding generates fumes, please wear appropriate mask for protection purposes.

AP Products Versachem 90214 Plastic Tank and Radiator Repair Kit - 30 Grams

Image of AP Products Versachem 90214 Plastic Tank and Radiator Repair Kit - 30 Grams

Product Highlights

  • ✅ Permanently repairs gasoline and diesel fuel tank leaks
  • ✅ Repairs leaks in less than 20 minutes; no draining or welding required
  • ✅ Chemical solvent resistance to gasoline, diesel and kerosene
  • ✅ Temperature Range: 40°F to 200°F
Please share this:

Facebook         Twitter         Linkedin         Pinterest        

Leave a Reply

Your email address will not be published. Required fields are marked *