Manual Tube Bender

ECOTRIC Tube and Pipe Bender Black Oxide Coating Steel Manual Hand Bender Tubing Tube Bender Pipe Bender Replace for WFB2

$209.00 @ Amazon.com

-SUPERIOR QUALITY: Made of high quality steel surface finished with Black Oxide Coating, which is impact-resistance, ensuring a powerful and long-lasting usage.

-GOOD PERFORMANCE: Ratcheting style handle improves leverage. A quick, economical way to produce angled bends in round and square tubing which can bend up to .125" wall thickness tubing and up to 16 gauge square tubing. With dies up to 2" round and 1-1/2" square, great choice for making frames, roll cages, awnings, furniture, and canopies.

-SOLID DESIGBN. The tubing bender is designed with high quality material that can be used for many years. The solid steel frame and cast-iron base will both ensure the durability of usage.

-PACKAGE INCLUDED: 1 piece Manual Pipe and Tubing Bender including degree ring and handle. Instruction is included for easier installation.

-INSTALLATION: Bolt installation, simple and quick. Please read the instructions carefully before installation. And install it using the hardware provided.

-SPECIFICATION: Color: Black, Material: Steel, Surface Finish: Oxide Coating, Number of Pieces: 1.

ECOTRIC Tube and Pipe Bender Black Oxide Coating Steel Manual Hand Bender Tubing Tube Bender Pipe Bender Replace for WFB2

Tube Bender, 3/8" to 1" Manual Tube Bender with Tube Cutter and 7 Sturdy Dies, 0-180° Easy and Fast Bending, Heavy Duty Steel Metal Copper Tube Bender for Repair Shops

$157.29 @ Amazon.com (Save 5%)

ERGONOMICAL HANDLE: Long handle with rubber overlay for better leverage and maneuverability, and retractable levers will increase the amount of pressure you apply to the metal. The compact and portable design is not only lightweight but also provides sufficient bending force. In addition The metal bender is ergonomically designed with a long handle, allowing you to operate it with less effort.

HIGH QUALITY CARBON STEEL MATERIAL: Our bending tools are made of sturdy steel that performs well in bending hard materials. High strength steel is intended for long term use. Heavy-duty base improves stability during operation. Made of high quality steel and cast aluminum with high precision and excellent machining quality, it can bend tubing easily and efficiently, which is not only sturdy and durable, but the quality workmanship also prevents the tubing from denting or collapsing.

WIDE RANGE OF USES: This manual pipe bender is suitable for cold state ventilation, seamless, neither hot nor cold pressed steel pipe: can also be used for metal pipe, stainless steel pipe, wire pipe, round steel pipe, low-pressure pipe and so on. Liquid connection pipe. Versatile steel bending machine is perfect for grids, gates, balcony railings, patio furniture and steel. Widely used in but not limited to power construction, road construction, house decoration, bridge pipe laying or repair.

BENDING RANGE: Our manual pipe bender is designed to handle iron pipe less than 0.08 inches/2 mm thick. It is suitable for pipe diameters from 3/8 inch to 1 inch (10-25 mm). Please note that this bender is only suitable for round pipes.

EXCELLENT ACCESSORIES: We offer a pipe cutter and a set of 7 different bending molds. The pipe cutter will meet your pipe cutting requirements, while the bending dies will meet a variety of bending needs. Bending dies are available in 3/8", 1/2", 9/16", 5/8", 3/4", 7/8" and 1" sizes. With these bending dies, corner bends can be made on round tubes with bending radii of 50, 60, 70, 80, 90, 110 and 113 mm.

Tube Bender, 3/8" to 1" Manual Tube Bender with Tube Cutter and 7 Sturdy Dies, 0-180° Easy and Fast Bending, Heavy Duty Steel Metal Copper Tube Bender for Repair Shops

VEVOR Pipe Tube Bender, 3/8" to 1" OD Manual Pipe Tube Bender with 7 Bending Dies, 180° Copper Aluminum Pipes Bending Tools for HVAC Air Conditioning Refrigerator Auto Repair

$136.56 @ Amazon.com

3/8"-1" O.D. Effortless Bending: VEVOR manual pipe bender can easily and smoothly bend metal pipes with a wall thickness of 0-2 mm, widely suitable for 3/8" to 1" (10-25 mm) different pipe diameters. Multifunctional bender machine is easy to control, bending pipes at any angle between 0-180 degrees. Specifically designed for round pipes only.

7 Quality Bending Dies: Our 0-180° tube bending tool comes with 7-sized bending dies: 3/8"、1/2"、9/16"、5/8"、3/4"、7/8"、1", accommodating a variety of diameter round pipes. It is easy to bend copper, aluminum, brass, stainless steel, and other types of tubing. Bending radius: 50, 60, 70, 80, 90, 110, 113 mm.

Robust & Durable Carbon Steel: Sturdy carbon steel pipe bender boasts exceptional strength and resistance to deformation, ensuring the tube bender can withstand the demands of frequent and rigorous use. Deliver precise and consistent bends, without damaging the structural integrity of the pipes.

Ergonomic & Comfortable Operation: This compact pipe tube bender set occupies minimal space while allowing for bending in narrow areas, making one-handed bending effortless. Extra-long ergonomic handle for increased leverage, comfortable grip, and less hand fatigue.

Widely Applicable: Our 3/8"-1" versatile manual tube bender serves both industrial-grade and personal DIY purposes, specifically designed for small-diameter metal pipes. Widely applicable in sanitation, heating systems, underfloor heating, refrigeration, air conditioning, and hydraulic systems.

VEVOR Pipe Tube Bender, 3/8" to 1" OD Manual Pipe Tube Bender with 7 Bending Dies, 180° Copper Aluminum Pipes Bending Tools for HVAC Air Conditioning Refrigerator Auto Repair

VEVOR YP-9 Manual Bench Top Compact Bender Pipe Bending Machine 7 Dies 1-3inch Metal Fabrication Tube Rod Pipe Bender 44ft Mount Powdercoat Telescoping Handle Maximum 5/8 Thick 1-15/16inch Width

$91.99 @ Amazon.com (Save 23%)

5/16" Bending Range: The bender can easily and smoothly bend max thickness stocks the diameter of tubes. And The metal bending tool is made of A3 high-hardness steel; it can be used for a long time. The heavy base improves stability during operation.

7 Superior Steel Dies: We provide 7 interchangeable tube bender dies, ranging from 1" to 3". All these are made of reinforced steel for durable use. The bending heads can meet different usage needs, making your work more convenient.

Different Shape of Materials: The product is able to bend different metal materials such as steel, wrought iron, brass, copper, aluminum, etc. And it can bend different shape of material, such as flat stock, round stock, square stock.

Energy-saving Structure: The metal bender adopts a long handle with ergonomic design for effortless operation. At the same time, this iron bender machine has a wide support surface. It can be installed on a bracket or simply on the ground.

Universal Usage: A multifunctional steel bender machine produces grids, gates, balcony railing, patio furniture, iron lamps, power construction, road building, bridges pipeline laying or repairing, etc.

VEVOR YP-9 Manual Bench Top Compact Bender Pipe Bending Machine 7 Dies 1-3inch Metal Fabrication Tube Rod Pipe Bender 44ft Mount Powdercoat Telescoping Handle Maximum 5/8 Thick 1-15/16inch Width

LORESO Tube Bender, Tubing Bender 0-180 Degrees Pipe Bender - 3 In 1 Copper Bender for 1/4" 5/16" 3/8" Tubing Bending Tools- Manual Tubing Bender for Copper, Brass, Aluminum and Thin Steel Pipes

$14.99 @ Amazon.com

MANUAL TUBING AND PIPE BENDER – manufactured with high-quality, heavy duty steel, this tube bender will efficiently bend copper, brass, aluminum and thin steel pipes. This pipe bender provides a fast, economical way to produce angled bends in round tubing

VERSATILE PIPE BENDER FOR ALL INDUSTRIES – this copper pipe bender is suitable for use on construction sites, plumbing jobs, shipping, manufacturing, heating, decorating or even at garage repair shops

EASY TO OPERATE – the Loreso manual pipe bender is easy to operate and portable so you can take it from site to site. Made with high precision and premium machining quality, it is a robust tool that is built to last

VARIOUS DEGREES AVAILABLE – simply adjust the metal bender according to the angle you require from 0-180 degrees. This pipe bender is a 3 in 1 tool and will fit 1/4”, 5/16”, 3/8” (8, 6, 10mm) tubing

STURDY CAST ALUMINUM FRAME – our copper tube bender is made from strong, durable cast aluminum and can be mounted on either a bench or frame – the safest way to bend tubes, conduit and pipes quickly and effectively

LORESO Tube Bender, Tubing Bender 0-180 Degrees Pipe Bender - 3 In 1 Copper Bender for 1/4" 5/16" 3/8" Tubing Bending Tools- Manual Tubing Bender for Copper, Brass, Aluminum and Thin Steel Pipes

VEVOR Pipe Tube Bender, 1/4", 3/8", 1/2" OD, 3 in 1 Manual Level Tube Bender, 180° Copper Aluminum Pipes Bending Tools for HVAC Air Conditioning

$30.99 @ Amazon.com (Save 11%)

Widely Applicable: Suitable for bending copper, aluminum, thin iron, thin stainless steel tubes with a wall thickness of 0.5-1.2mm. Note: If the tube wall thickness is less than 0.5mm, the pipe may be damaged.

3-in-1 Design: Our 3-in-1 tube bender can accommodate 1/4", 3/8", and 1/2" pipe or tube. Handle length 15.7 IN (40CM). Distributes force evenly to prevent pipe deformation, flattening or compression.

0-180° Bending: The multifunctional bender machine is easy to control, allowing you to bend pipes between 0° and 180°. This versatile tool can be widely used in automotive repair, HVAC maintenance, and copper pipe DIY projects.

Lightweight and Portable: Made of aluminum alloy, the tube bender is lightweight and portable, and the flexible rubber handle provides a comfortable grip.

Easy Operation: To bend pipes, adjust the tube hook to the corresponding position and insert the pipe into the appropriate bending groove and pipe hook. Then, hold the non-slip handle with both hands and press evenly with force. There is no need to cross the handles, and you can easily achieve pipe bending

VEVOR Pipe Tube Bender, 1/4", 3/8", 1/2" OD, 3 in 1 Manual Level Tube Bender, 180° Copper Aluminum Pipes Bending Tools for HVAC Air Conditioning

Hydraulic Pipe Bender 1/2 Inch Manual Copper Exhaust Tube Bender Tool 6 Dies (1/2",3/4",1",1-1/4",1-1/2",2") 𝟏𝟐 𝐓𝐨𝐧 Adjustable Rollers 90-180 Degree Bending Steel Iron Metal Ratcheting

$185.00 @ Amazon.com

💖[𝐇𝐢𝐠𝐡-𝐪𝐮𝐚𝐥𝐢𝐭𝐲 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥] - 12Ton hydraulic pipe bender is made of high-quality steel, with a compact overall structure design, smooth appearance, wear-resistant, and can withstand a weight of up to 12 tons. The hydraulic system and the return spring system can help you efficiently complete the bending work.

💖[𝟔 𝐃𝐢𝐞𝐬 𝐚𝐧𝐝 𝟔 𝐚𝐝𝐣𝐮𝐬𝐭𝐚𝐛𝐥𝐞 𝐑𝐨𝐥𝐥𝐞𝐫 𝐋𝐞𝐯𝐞𝐥𝐬] - This copper pipe bender includes 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" a total of 6 Precision casting dies; at the same time there are 6 adjustable roller levels to meet the bending angle of the tube.

💖[𝟏𝟖𝟎 𝐃𝐞𝐠𝐫𝐞𝐞 𝐁𝐞𝐧𝐝𝐢𝐧𝐠] - 12Ton exhaust pipe bender can bend the pipe within 90-180 degrees, reducing your workload and improving work efficiency. It can be used in construction, chemical, plumbing, petroleum, mining, shipbuilding and other industries.

💖[𝐓𝐡𝐞 𝐔𝐧𝐢𝐪𝐮𝐞 𝐆𝐞𝐚𝐫 𝐃𝐞𝐬𝐢𝐠𝐧 𝐀𝐭 𝐓𝐡𝐞 𝐄𝐧𝐝 𝐨𝐟 𝐓𝐡𝐞 𝐇𝐲𝐝𝐫𝐚𝐮𝐥𝐢𝐜 𝐑𝐨𝐝] - The upper end of the hydraulic rod is made of vinyl material, which is comfortable to the hand. The gear at the end of the hydraulic lever is used to control the opening and closing of the valve. The hydraulic lever is aligned with the valve, and the lift of the pipe bender can be controlled by turning the valve slightly.

💖[𝟏𝟎𝟎% 𝐒𝐚𝐭𝐢𝐬𝐟𝐚𝐜𝐭𝐨𝐫𝐲 𝐒𝐞𝐫𝐯𝐢𝐜𝐞] - Please rest assured to buy our pipe tube bender. Our products are guaranteed. If you encounter any problems during use, please feel free to contact us. We will definitely give you a satisfactory answer.

Hydraulic Pipe Bender 1/2 Inch Manual Copper Exhaust Tube Bender Tool 6 Dies (1/2",3/4",1",1-1/4",1-1/2",2") 𝟏𝟐 𝐓𝐨𝐧 Adjustable Rollers 90-180 Degree Bending Steel Iron Metal Ratcheting

Vevor Pipe Tube Bender 3/8" to 1", Manual Tube Bender with 7 Dies, Heavy Duty Tube Bender Tubing of Steel Metal Copper Ideal for Repair Shops

$134.99 @ Amazon.com (Save 20%)

3/8"-1" Bending Range: The bender can easily and smoothly bend less than 0.08 inch/2 mm thickness iron pipe. And the tool is suitable for 3/8"-1"(10-25 mm) pipe diameter. Only for round stock.

7 Superior Steel Dies: We provide 7 tube bender dies, size ranging 3/8", 1/2", 9/16", 5/8", 3/4", 7/8", 1". The bending formers can meet different bending needs, producing angled bends in round tubing. The Bending Radius: 50, 60, 70, 80, 90, 110, 113 mm.

Carbon Steel Material: Made of strong steel material, our bending tool performs well in bending hard materials. High-strength steel aims for a long time using. The heavy base improves stability during operation.

Compact & Portable Design: Compact design allows easy carrying, and lightweight but gives enough bending force. The metal bender adopts a long handle with an ergonomic design for effortless operation.

Universal Usage: A multifunctional steel bender machine is suitable for grids, gates, balcony railing, patio furniture, and steel materials. Widely used in power construction, road building, house decorating, bridges pipeline laying or repairing.

Vevor Pipe Tube Bender 3/8" to 1", Manual Tube Bender with 7 Dies, Heavy Duty Tube Bender Tubing of Steel Metal Copper Ideal for Repair Shops

Hydraulic Pipe Bender 1/2 Manual Copper Exhaust Tube Bender Tool 6 Dies (1/2,3/4,1,1-1/4,1-1/2,2) 𝟏𝟐 𝐓𝐨𝐧 Adjustable Rollers 90-180° Bending Steel Iron Metal Ratcheting

$169.99 @ Amazon.com

🔔[𝐀𝐫𝐠𝐮𝐦𝐞𝐧𝐭] - Dead load: 12Ton, Stroke: 130 mm(5.12), adjustable height:255cm(8.36) in maximum,sizes of dies: 1/2, 3/4, 1, 1-1/4, 1-1/12 and 2,, oil capacity: 0.75kg(1.65 lbs).

🔔[𝟗𝟎-𝟏𝟖𝟎° 𝐁𝐞𝐧𝐝𝐢𝐧𝐠] - 12 Ton copper pipe bender can bend the pipe within 90-180 degrees, reducing your workload and improving work efficiency.

🔔[𝟔 𝐃𝐢𝐞𝐬 𝐚𝐧𝐝 𝟔 𝐀𝐝𝐣𝐮𝐬𝐭𝐚𝐛𝐥𝐞 𝐑𝐨𝐥𝐥𝐞𝐫 𝐋𝐞𝐯𝐞𝐥𝐬] - This copper pipe bender includes 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 a total of 6 Precision casting dies; at the same time there are 6 adjustable roller levels to meet the bending angle of the tube.

🔔[𝐓𝐡𝐞 𝐔𝐧𝐢𝐪𝐮𝐞 𝐆𝐞𝐚𝐫 𝐃𝐞𝐬𝐢𝐠𝐧 𝐀𝐭 𝐓𝐡𝐞 𝐄𝐧𝐝 𝐨𝐟 𝐓𝐡𝐞 𝐇𝐲𝐝𝐫𝐚𝐮𝐥𝐢𝐜 𝐑𝐨𝐝] - The upper end of the hydraulic rod is made of vinyl material, which is comfortable to the hand. The gear at the end of the hydraulic lever is used to control the opening and closing of the valve. The hydraulic lever is aligned with the valve, and the lift of the pipe bender can be controlled by turning the valve slightly.

🔔[𝐄𝐱𝐜𝐞𝐥𝐥𝐞𝐧𝐭 𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐞] - High quality steel frame material can be applied to a variety of pipe bending occasions，steel frame can work in many condition. Compact design, smooth appearance, wear resistance, saving time and labor on bending tubes.

Hydraulic Pipe Bender 1/2 Manual Copper Exhaust Tube Bender Tool 6 Dies (1/2,3/4,1,1-1/4,1-1/2,2) 𝟏𝟐 𝐓𝐨𝐧 Adjustable Rollers 90-180° Bending Steel Iron Metal Ratcheting

Aprafie Pipe Bender, 3/8" to 1" Manual Tubing Bender with Tube Cutter and 7 Dies for Metal Copper Steel Hvac Tubing Benders Tool

$172.04 @ Amazon.com

PERFECT ACCESSORIES: We also offer a pipe cutter and a set of 7 different bending dies to meet your tubing needs. The pipe cutter can cut copper pipe to any desired length, while the 3/8"-1" bending dies can bend a variety of metal pipe diameters.

3/8"-1" BENDING RANGE: Available in 3/8", 1/2", 9/16", 5/8", 3/4", 7/8" and 1" sizes, our manual pipe bender is designed to easily handle steel pipe thicknesses of less than 0.08 inches/2 mm. It is suitable for copper pipe diameters from 3/8" to 1" (10-25 mm). Please note that this tube bender is only suitable for round materials.

STRONG AND DURABLE: Our pipe bending tool is constructed from high-quality steel, ensuring sturdiness and durability. The quality craftsmanship prevents the pipe from denting or collapsing, ensuring reliable performance.

ERGONOMIC DESIGN: Our metal bending machines are equipped with a long handle that ensures optimal comfort and effortless operation.

MULTI-PURPOSE APPLICATION: This versatile steel tubing bender is suitable for a wide range of applications in various areas, including construction sites, plumbing and heating projects, sanitation installations, garage or vehicle maintenance, and home improvement tasks. It is designed to effectively meet a diverse set of needs.

Aprafie Pipe Bender, 3/8" to 1" Manual Tubing Bender with Tube Cutter and 7 Dies for Metal Copper Steel Hvac Tubing Benders Tool